JeepParts
My Garage
My Account
Cart
OEM Jeep Patriot Wiper Motor
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Wiper Motors found
Jeep Patriot Wiper Linkage Part Number: 5303827AF
$223.21 MSRP: $340.00You Save: $116.79 (35%)Ships in 1-2 Business Days
Jeep Patriot Wiper Motor Part Number: 5116146AE
$95.89 MSRP: $144.00You Save: $48.11 (34%)Ships in 1-2 Business Days
Jeep Patriot Wiper Linkage Part Number: 4879432AH
$218.99 MSRP: $329.00You Save: $110.01 (34%)Ships in 1-2 Business Days
Jeep Patriot Wiper Motor Part Number: 68003740AA
$76.65 MSRP: $114.00You Save: $37.35 (33%)Ships in 1-3 Business DaysJeep Patriot Wiper Motor Part Number: 68003729AA
$126.63 MSRP: $181.00You Save: $54.37 (31%)Ships in 1-2 Business Days
Jeep Patriot Wiper Motor
Choose OEM Wiper Motor that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Wiper Motor follows strict manufacturing steps to lock in quality and fit. If your Jeep Patriot matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Patriot parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.
The Wiper Motor human purpose is to operate the windshield wiper system in Jeep Patriot by so that it can sweep the rain, snow or any other obstacle enhance the visibility. This is an electric motor whereby its operation can be adjusted to provide different speeds, which enable the driver to determine the rate of wiper movement depending on the weather condition. Jeep Patriot Wiper Motors can be of two types, new as well as refurbished products. New Wiper Motors are those that are purchased from the manufacturing company while the rebuilt ones are those wiper motors that have been used before they were assembled and restored to serving new standards. This variety is important to keep the Jeep Patriot owners' optimal interest in view while at the same time making Wiper Motor serve its purpose as intended.
Jeep Patriot Wiper Motor Parts and Q&A
- Q: How to Maintain a Wiper Motor on Jeep Patriot?A:To work on the wiper motor, you need to first disconnect and cut off electrical contact with the battery. After that, disconnect the front Wiper Arms from the wiper pivots and take out the cover that hides the front wiper module. Unfasten the routing clip stuck to the stud in the cowl plenum and remove the connector from the receptacle of the front wiper motor. After that, take out the screws that hold the ends of the front wiper module bracket to the stamped brackets inside the cowl plenum. press the front wiper module in sufficiently to pull the knob-like rubber isolator from its slot in the forward wall of the cowl plenum and then remove the whole unit from the cowl plenum.
- Q: How to Service and Repair a Wiper Motor Without Damaging the Plastic Drive Link Bushings on Jeep Patriot?A:When working with the front wiper motor, make sure not to push or force the plastic drive links and use your fingers or a tool on the metal parts instead; breaking a bushing often means you'll have to replace the entire front wiper module. Since indexing the crank arm incorrectly over the output shaft requires the whole motor to be replaced, do not remove the crank arm nut. Put the motor (5) and crank arm under the module bracket (1) and then screw the two bolts (2) into the two nuts (3) that secure the motor bracket (4) to the module, ensuring all screws are tightened to 7.5 Nm (66 in. lbs.). Subsequently, set the sleeve bushing (2) of the driver link on the end of the motor crank arm (4) ball stud and put the socket bushing (3) on the crank arm ball stud going to the passenger wiper drive. Getting the socket bushing onto the ball stud is easy if you screw a 19 millimeter/3/4 inch socket onto the domed side of the bushing then use large channel-lock pliers to securely tighten the socket over the crank arm on the same side as the bushing with no direct pressure on the plastic. first switch the ignition to ON and cycle the front Wiper Switch until the wipers return to their park position, then put the front Wiper Arms back onto the wiper pivots. In the end, replace the front wiper module (1) in the vehicle and link the battery negative wire once again.
Related Jeep Patriot Parts
Jeep Patriot Bumper
Jeep Patriot Speedometer
Jeep Patriot Windshield Washer Nozzle
Jeep Patriot Ashtray
Jeep Patriot Door Lock Switch
Jeep Patriot Exhaust Nut
Jeep Patriot Shift Indicator
Jeep Patriot Washer Reservoir
Jeep Patriot Window Crank Handles
Jeep Patriot Windshield Wiper
Jeep Patriot Wiper Arm
Jeep Patriot Wiper Blade