Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Mopar 4797700
Boot Kit, Front Inner Passenger Side

1996-2007 Mopar 4797700

Customer Questions & Expert Answers (9)
Mopar 4797700 Boot Kit, Front Inner Passenger Side
  • Part Description
    Boot Kit - Half Shaft; CV Joint Boot Kit, Front Left Inner, Front Right Inner; CV Boot
  • Position
    Front Inner Passenger Side
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 4797700 Boot Kit, Front Inner Passenger Side is Ref No. 2 in the diagram below

    1996 Chrysler Sebring Boot Kit, Front Inner Passenger Side Diagram for 4797700
    The diagram listed above is for your reference. View diagram for your vehicle

  • Vehicle Fitment

    Year Make Model Trim Engine
    2000 Chrysler CirrusLX, LXi4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
    2000 Chrysler Grand VoyagerBase, SE6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
    2004-2006 Chrysler PacificaBase, Limited, Touring6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
    1996-2006 Chrysler SebringBase, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
    1996-2007 Chrysler Town & CountryBase, EL, EX, LX, LXi, Limited, SX, Touring6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
    2000-2003 Chrysler VoyagerBase, Ec, LX, SE4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
    1996-2007 Dodge CaravanBase, C/V, ES, Ec, LE, SE, SXT, Sport4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, BATTERY EV (EV/BEV)
    1996-2007 Dodge Grand CaravanAnniversary Edition, Base, C/V, EL, ES, EX, LE, SE, SE Plus, SXT, Sport4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
    2002-2006, 2000 Dodge StratusES, R/T, SE, SE Plus, SXT4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Any idea if 4797700 will fit my car? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 4797700, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    How should grease be distributed during installation for the 2000 Chrysler Cirrus? Posted by Customer
    A:
    Distribute half of the grease from the service package into the tripod housing and the remainder into the sealing boot.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    What should be done if any parts are worn for the 2004 Chrysler Pacifica? Posted by Customer
    A:
    Replace the halfshaft assembly as its components are not serviceable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    What should be done to ensure the outer C/V joint is fully seated for the 2003 Chrysler Sebring? Posted by Customer
    A:
    Use a soft-faced hammer to tap the end of the stub axle (with nut installed) until the outer C/V joint is fully seated on the interconnecting shaft, ensuring it is seated against the circlip.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    How do you remove the sealing boot for the 2007 Chrysler Town & Country? Posted by Customer
    A:
    Slide the sealing boot off the outer CV joint housing and down the interconnecting shaft, then wipe away grease to expose the outer CV joint and interconnecting shaft.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    What is the next step after distributing grease for the 2001 Chrysler Voyager? Posted by Customer
    A:
    Install the outer CV joint seal boot retaining clamp onto the interconnecting shaft, positioning the sealing boot so that only the thinnest groove on the interconnecting shaft is visible.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    What should be done with the large and small boot clamps for the 2007 Dodge Caravan? Posted by Customer
    A:
    Discard the large boot clamp that retains the inner tripod joint sealing boot to the tripod joint housing and the small clamp that retains the inner tripod joint sealing boot to the interconnecting shaft.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    What tool should be used to tighten the clamp for the 2002 Dodge Grand Caravan? Posted by Customer
    A:
    Use crimping tool C-4975-A to tighten the clamp until the jaws are closed completely.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    Q:
    What tool is used to dislodge the C/V joint housing for the 2000 Dodge Stratus? Posted by Customer
    A:
    Use a soft-faced hammer to dislodge the C/V joint housing from the internal circlip.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this CV Boot
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Boot Kit, Front Inner Passenger Side 4797700 Designed for Proper Fit and Performance

The Mopar part 4797700 Boot Kit, Front Inner Passenger Side comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar CV Boot component functions as a reliable support element for essential vehicle systems through its engineered design. This part 4797700 Boot Kit, Front Inner Passenger Side supports Dodge Grand Caravan, Caravan, Stratus alongside Chrysler Town & Country, Pacifica, Sebring. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 4797700. The authentic Mopar component produced by Mopar functions as a Boot Kit - Half Shaft; CV Joint Boot Kit, Front Left Inner, Front Right Inner; CV Boot and fits into the Front Inner Passenger Side of the vehicle.
The part 4797700 uses durable material for construction and it weighs 1.20 Pounds while its dimensions are 5.6 x 3.9 x 4.0 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility and it also known by the names Inner Boot; Boots; Boot Package, Inner CV Right W/ABS; Boot Package, Inner CV Left; Boot Kit Half Shaft Inner. This part 4797700 is necessary for every vehicle. The inventory system lists this product with SKU: 4797700. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.