Make sure this part fits

Mopar 55076401
Mirror Button

1984-2017 Mopar 55076401

Customer Questions & Expert Answers (29)
Mopar 55076401 Mirror Button
Mopar 55076401 Mirror Button
  • Part Description
    Button - Rearview Mirror; Interior Rear View Mirror Mounting Base, Front; Interior Rear View Mirror Bracket
  • Manufacturer
    Mopar
Make sure this part fits
$25.87 MSRP: $37.20
You Save: $11.33 (31%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2011-2017 Chrysler 200C, LX, Limited, S, Touring4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
    1999-2004 Chrysler 300MBase, Pro-Am, Special6 Cyl 3.5 L GAS
    2007-2009 Chrysler AspenLimited, Limited Hybrid8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
    1995-2000 Chrysler CirrusLX, LXi4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
    1993-2004 Chrysler ConcordeBase, LX, LXi, Limited6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
    2000 Chrysler Grand VoyagerBase, SE6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
    1993 Chrysler ImperialBase6 Cyl 3.8 L GAS
    1999-2001, 1994-1997 Chrysler LHSBase6 Cyl 3.5 L GAS
    1988-1996 Chrysler New YorkerBase, Fifth Avenue, Landau, Salon6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
    2006-2010 Chrysler PT CruiserBase, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring4 Cyl 2.4 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 55076401 works for my vehicle? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 55076401, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What is the final step in the installation process for the 2009 Chrysler Aspen? Posted by Customer
    A:
    Connect the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What is the first step to service and repair the power mirror switch for the 2000 Chrysler Cirrus? Posted by Customer
    A:
    Disconnect and isolate the battery negative remote cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    How do you remove the power mirror switch for the 2002 Chrysler 300M? Posted by Customer
    A:
    Use a trim stick to remove the power mirror switch from its mounting position and disconnect the wire connector.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What is the first step to replace the power mirror switch for the 2001 Chrysler LHS? Posted by Customer
    A:
    Use a trim stick to remove the switch from its mounting position.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What do you do after removing the old switch for the 2001 Chrysler Concorde? Posted by Customer
    A:
    Connect the wire connector to the new switch.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What should be done after placing the mirror switch for the 2007 Chrysler PT Cruiser? Posted by Customer
    A:
    Connect the power mirror switch wiring connector.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What do you do after snapping the switch into place for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Connect the switch wire connector.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What should be reinstalled after the headlamp switch assembly is in place for the 2001 Chrysler Voyager? Posted by Customer
    A:
    Reinstall the instrument panel lower cover.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What is the next step after removing the trim panel for the 2008 Dodge Avenger? Posted by Customer
    A:
    Disconnect the switch wire connector.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What is the first step to install the power mirror switch for the 2007 Chrysler Town & Country? Posted by Customer
    A:
    Attach it to the headlamp switch bezel.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What is the first step to replace the power mirror switch for the 2000 Dodge Caravan? Posted by Customer
    A:
    Disconnect and isolate the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What is the first step to install the power mirror switch for the 2007 Dodge Dakota? Posted by Customer
    A:
    Install the mirror switch to the window/lock switch assembly.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    How do you begin the installation process for the 2002 Dodge Grand Caravan? Posted by Customer
    A:
    Begin by installing the switch back into the steering column shroud.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What tool can be used to pry up the window switch for the 2009 Dodge Journey? Posted by Customer
    A:
    A trim tool or equivalent.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What is the final step in the process for the 2006 Dodge Durango? Posted by Customer
    A:
    Reinstall the window/lock switch assembly and reconnect the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What is the first step to replace the power mirror switch for the 2001 Dodge Intrepid? Posted by Customer
    A:
    Use a trim stick to remove the switch from its mounting position.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What is the first step to service the power mirror switch for the 2000 Dodge Ram 1500? Posted by Customer
    A:
    Disconnect and isolate the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What should be done after placing the power mirror switch for the 2001 Dodge Ram 1500 Van? Posted by Customer
    A:
    Reconnect the power mirror switch wire harness connector.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What should be done after removing the window switch bezel for the 2002 Dodge Neon? Posted by Customer
    A:
    Disconnect the wire connector from the switch and remove the two switch retaining screws.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What is the final step to complete the process for the 2002 Dodge Ram 2500? Posted by Customer
    A:
    Push the control knob onto the power mirror switch and reconnect the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    How do you remove the control knob from the power mirror switch for the 2002 Dodge Ram 3500? Posted by Customer
    A:
    Pull it rearward from the power mirror switch stem.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    How do you remove the power mirror switch control knob for the 2001 Dodge Ram 3500 Van? Posted by Customer
    A:
    Pull it rearward from the switch stem.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What is the first step to service and repair the power mirror switch for the 2000 Dodge Ram 2500 Van? Posted by Customer
    A:
    Disconnect and isolate the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    How do you remove the center instrument panel trim bezel for the 2000 Dodge Viper? Posted by Customer
    A:
    Use a trim stick, special tool #C-4755, to gently pry it out and remove it from the vehicle.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What is the final step after installing the power mirror switch for the 2001 Jeep Cherokee? Posted by Customer
    A:
    Reconnect the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What should be done for installation for the 2000 Dodge Stratus? Posted by Customer
    A:
    Reverse the procedures outlined.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What is the first step for installation of the power mirror switch for the 2005 Jeep Grand Cherokee? Posted by Customer
    A:
    Install the power mirror switch back into the door trim panel.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    Q:
    What is the final step in the process for the 2002 Jeep Liberty? Posted by Customer
    A:
    Reinstall the door trim panel and reconnect the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Mirror Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Mirror Button 55076401 Designed for Proper Fit and Performance

The Mopar part 55076401 Mirror Button comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Mirror Switch component functions as a reliable support element for essential vehicle systems through its engineered design. This part 55076401 Mirror Button supports Jeep Wrangler, Cherokee, Grand Cherokee alongside Dodge Ram 1500, Dakota, Durango, Ram 1500, 2500, 3500 and Chrysler 200, Town & Country, Pacifica. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 55076401. The authentic Mopar component produced by Mopar functions as a Button - Rearview Mirror; Interior Rear View Mirror Mounting Base, Front; Interior Rear View Mirror Bracket.
The part 55076401 uses durable material for construction and it weighs 0.50 Pounds while its dimensions are 1.6 x 1.2 x 0.2 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility and it also known by the names Cover Button; Mirror Assembly Mount Bushing; Rearview Mirror Button; Mirror Inside Button.. This part 55076401 is necessary for every vehicle. The inventory system lists this product with SKU: 55076401. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.