Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Mopar 4897490AC
Intake Manifold

1998-2003 Mopar 4897490AC

Customer Questions & Expert Answers (9)
Mopar 4897490AC Intake Manifold
  • Part Description
    Manifold - Intake; Engine Intake Manifold
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2003 Dodge Ram 1500 Intake Manifold Diagram for 4897490AC
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 4897490AC

  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2003 Dodge DakotaR/T, SLT, Sport8 Cyl 5.9 L GAS
    2000-2003 Dodge DurangoBase, R/T, SLT, SLT Plus, SXT, Sport8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
    2000-2003 Dodge Ram 1500Laramie, SLT, ST, Sport8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
    2000-2003 Dodge Ram 1500 VanBase8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
    2000-2002 Dodge Ram 2500Base8 Cyl 5.9 L GAS
    2000-2003 Dodge Ram 2500 VanBase8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
    2000-2002 Dodge Ram 3500Base8 Cyl 5.9 L GAS
    2000-2003 Dodge Ram 3500 VanBase8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Any idea if 4897490AC will fit my car? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 4897490AC, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    How do you prepare the power steering pump for removal for the 2001 Dodge Dakota? Posted by Customer
    A:
    Loosen the accessory drive belt tension, remove the belt from the power steering pump, and take out the power steering pump and brackets from the water pump and intake manifold.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be reinstalled after the intake manifold is secured for the 2000 Dodge Durango? Posted by Customer
    A:
    Reinstall the closed crankcase ventilation and evaporation control systems, coil wires, coolant temperature sending unit wire, heater hoses, bypass hose, distributor cap and wires, and reconnect the accelerator linkage, speed control, and transmission kickdown cables.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be done after applying the sealant for the 2002 Dodge Ram 1500 Van? Posted by Customer
    A:
    Install the front and rear cross-over gaskets, then using a new gasket, install the throttle body onto the intake manifold.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What components need to be removed after disconnecting the battery for the 2002 Dodge Ram 1500? Posted by Customer
    A:
    Remove the resonator assembly and air inlet hose.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be removed after the intake air grid heater for the 2002 Dodge Ram 2500? Posted by Customer
    A:
    Remove the high pressure fuel lines and the remaining intake manifold cover to-cylinder head bolts.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What sealant should be applied and how for the 2001 Dodge Ram 2500 Van? Posted by Customer
    A:
    Apply Mopar GEN II Silicone Rubber Adhesive Sealant, or equivalent, to the four corner joints, using a sealant approximately 5 mm (0.2 inch) in diameter and 15 mm (0.6 inch) long.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be done after installing the intake manifold cover for the 2002 Dodge Ram 3500? Posted by Customer
    A:
    Install the high pressure fuel lines and the high pressure fuel line support bracket-to-intake manifold cover bolts, also tightening to 24 Nm (18 ft. lbs.) torque.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    How should the intake manifold be positioned for the 2002 Dodge Ram 3500 Van? Posted by Customer
    A:
    Carefully lower the intake manifold into position on the cylinder block and cylinder heads, inspecting to ensure seals are in place.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Intake Manifold 4897490AC Designed for Proper Fit and Performance

The Mopar part 4897490AC Intake Manifold comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Intake Manifold component functions as a reliable support element for essential vehicle systems through its engineered design. This part 4897490AC Intake Manifold supports Dodge Ram 1500, Dakota, Durango. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 4897490AC. The authentic Mopar component produced by Mopar functions as a Manifold - Intake; Engine Intake Manifold.
The part 4897490AC uses durable material for construction. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility and it also known by the names Manifold Intake. This part 4897490AC is necessary for every vehicle. The inventory system lists this product with SKU: 4897490AC. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.