Make sure this part fits

Mopar 4792317AB
Oil Seal, Front

1986-2011 Mopar 4792317AB

Customer Questions & Expert Answers (20)
Mopar 4792317AB Oil Seal, Front
Mopar 4792317AB Oil Seal, Front
  • Part Description
    Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal
  • Position
    Front
  • Replaces
    4792317, 4273275
  • Manufacturer
    Mopar
Make sure this part fits
$18.27 MSRP: $26.25
You Save: $7.98 (31%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Chrysler 300Limited, S, Signature Series, Touring6 Cyl 3.5 L GAS
    1999-2004 Chrysler 300MBase, Pro-Am, Special6 Cyl 3.5 L GAS
    1993-2004 Chrysler ConcordeBase, LX, LXi, Limited6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
    2000 Chrysler Grand VoyagerBase, SE6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
    1990-1993 Chrysler ImperialBase6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
    1999-2001, 1994-1997 Chrysler LHSBase6 Cyl 3.5 L GAS
    1986 Chrysler LaserBase, XE4 Cyl 2.5 L GAS
    1986-1993 Chrysler LeBaronBase, GT, GTC, GTS, High Line, LE, Landau, Mark Cross, Premium4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
    1990-1996, 1986-1987 Chrysler New YorkerBase, Fifth Avenue, Landau, Salon4 Cyl 2.5 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
    2004-2008 Chrysler PacificaBase, LX, Limited, Touring6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Any idea if 4792317AB will fit my car? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 4792317AB, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What should be done after disconnecting the battery cable for the 2008 Chrysler 300? Posted by Customer
    A:
    Raise the vehicle and remove the splash shield by taking out the retaining bolts.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    What tools are used to drive the seal into the retainer housing for the 2002 Chrysler 300M? Posted by Customer
    A:
    Use Special Tool 6926-2 Installer along with C-4171 Handle to drive the seal into the retainer housing.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    What tools are used to drive the seal into the retainer housing for the 2000 Chrysler Concorde? Posted by Customer
    A:
    Use Special Tool 6926-2 Installer and C-4171 Handle.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    What should you do if there is a burr or scratch on the crankshaft edge for the 2000 Chrysler LHS? Posted by Customer
    A:
    Clean the surface with 400 grit sandpaper to prevent seal damage during installation.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    How is the seal installed into the retainer housing for the 2008 Chrysler Pacifica? Posted by Customer
    A:
    Position the seal over Special Tool 6926-1 Pilot and use Special Tool 6926-2 Installer with C-4171 Handle to drive the seal in.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    How do you know when to stop driving the seal into the block for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Drive the seal until the Seal Driver bottoms out against the block.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    What is the first step to service and repair the front crankshaft seal for the 2002 Chrysler Prowler? Posted by Customer
    A:
    Remove the timing belt.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    How do you install the new seal for the 2001 Chrysler Town & Country? Posted by Customer
    A:
    Position the seal over the Special Tool 6926-1 Pilot and use Special Tool 6926-2 Installer with C-4171 Handle to drive the seal into the retainer housing.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    How should the new seal be positioned during installation for the 2001 Chrysler Voyager? Posted by Customer
    A:
    Place Special Tool 6926-1 Seal Guide on the crankshaft and position the seal over the guide tool, ensuring the lip of the seal faces the crankcase.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    What should you do if there are burrs or scratches on the crankshaft edge for the 2001 Dodge Caravan? Posted by Customer
    A:
    Clean them up with 400 grit sandpaper to avoid damaging the new seal during installation.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    What is the first step to install the crankshaft main bearing seal for the 2008 Dodge Avenger? Posted by Customer
    A:
    Ensure that any burrs or scratches on the crankshaft edge are cleaned up with 800 emery cloth to prevent seal damage.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    How do you remove the crankshaft rear oil seal/adapter for the 2006 Dodge Charger? Posted by Customer
    A:
    Remove the seal retainer attaching screws and take out the crankshaft rear oil seal/adapter.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    What should be done while applying pressure to the seal retainer against Special Tools 8225 for the 2009 Dodge Challenger? Posted by Customer
    A:
    Tighten the seal retainer screws to 12 Nm (105 in. lbs.) and then remove the special tool.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    How do you install the new seal for the 2002 Dodge Grand Caravan? Posted by Customer
    A:
    Position the seal over the Special Tool 6926-1 Pilot and use Special Tool 6926-2 Installer with C-4171 Handle to drive the seal into the retainer housing.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    What should you ensure while prying out the seal for the 2003 Dodge Intrepid? Posted by Customer
    A:
    Ensure the blade does not contact the crankshaft seal surface, although contact with the crankshaft edge (chamfer) is acceptable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    What is the first step in the installation process for the 2009 Dodge Journey? Posted by Customer
    A:
    Install the dowel pin into the crankshaft, ensuring it protrudes 1.2 mm (0.047 in.).
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    What is the next step after removing the splash shield for the 2008 Dodge Magnum? Posted by Customer
    A:
    Remove the structural collar, followed by the transmission.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    Can the crankshaft oil seal be reused after removal for the 2009 Dodge Nitro? Posted by Customer
    A:
    No, the crankshaft oil seal cannot be reused after removal.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    Q:
    What tool is used to remove the crankshaft seal for the 2007 Jeep Wrangler? Posted by Customer
    A:
    A 3/16 flat bladed pry tool is used.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Crankshaft Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Oil Seal, Front 4792317AB Designed for Proper Fit and Performance

The Mopar part 4792317AB Oil Seal, Front comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Crankshaft Seal component functions as a reliable support element for essential vehicle systems through its engineered design. This part 4792317AB Oil Seal, Front supports Jeep Wrangler alongside Dodge Charger, Challenger, Dakota, Chrysler 300, Town & Country, Pacifica. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 4792317AB. The authentic Mopar component produced by Mopar functions as a Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal and fits into the Front of the vehicle.
The part 4792317AB uses durable material for construction and it weighs 0.50 Pounds while its dimensions are 0.6 x 1.9 x 1.9 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility and it also known by the names Crankshaft Seal; Front Crank Seal; Timing Cover Assy; Front Main Crankshaft Seal.. This product functions as a substitute for 4792317, 4273275. This part 4792317AB is necessary for every vehicle. The inventory system lists this product with SKU: 4792317AB. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.