Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Mopar 4671779AC
Impact Sensor, Front

2001-2015 Mopar 4671779AC

Customer Questions & Expert Answers (15)
Mopar 4671779AC Impact Sensor, Front
Mopar 4671779AC Impact Sensor, Front
Mopar 4671779AC Impact Sensor, Front
Mopar 4671779AC Impact Sensor, Front
Mopar 4671779AC Impact Sensor, Front
  • Part Description
    Sensor - Impact; Air Bag Impact Sensor, Center, Front; Air Bag Sensor
  • Position
    Front
  • Manufacturer
    Mopar
Make sure this part fits
$48.02 MSRP: $103.00
You Save: $54.98 (54%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 4671779AC Impact Sensor, Front is Ref No. 8 in the diagram below

    2010 Dodge Challenger Impact Sensor, Front Diagram for 4671779AC
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 4671779AC

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Chrysler 300Base, C, C SRT8, LX, Limited, S, Signature Series, Touring6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
    2005-2010 Chrysler PT CruiserBase, Classic, Couture Edition, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring4 Cyl 2.4 L GAS
    2004-2008 Chrysler PacificaBase, LX, Limited, Touring6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
    2001-2006 Chrysler SebringBase, LX, LXi, Limited, TSi, Touring4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
    2006-2007 Chrysler Town & CountryBase, LX, Limited, Touring6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
    2006-2007 Dodge CaravanBase, C/V, SE, SXT4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
    2008-2015 Dodge ChallengerR/T, R/T Classic, R/T Plus, Rallye Redline, SE, SRT 392, SRT Hellcat, SRT8, SXT, SXT Plus, Scat Pack6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
    2006-2010 Dodge ChargerBase, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
    2003-2007 Dodge DakotaBase, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
    2006-2007 Dodge Grand CaravanBase, SE, SXT6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Any idea if 4671779AC will fit my car? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 4671779AC, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What should be done after disconnecting the electrical connector for the 2005 Chrysler 300? Posted by Customer
    A:
    Remove the two retaining screws 2.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What should be done after installing the SAS for the 2005 Chrysler Sebring? Posted by Customer
    A:
    Connect the SAS electrical connector and reinstall the lower B-pillar trim.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What is the final step before closing the hood for the 2005 Chrysler Pacifica? Posted by Customer
    A:
    Verify the vehicle and system operation.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What should be positioned and installed first for the 2007 Chrysler PT Cruiser? Posted by Customer
    A:
    Position the Satellite Acceleration Sensor (SAS) and install the retaining screws.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    How do you install the sliding door opening mounted sensor for the 2007 Chrysler Town & Country? Posted by Customer
    A:
    Connect the electrical connector, position the sensor, install the two retaining screws with the specified torque, and follow the same warnings and verification steps.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    How do you remove the front impact sensor for the 2006 Dodge Caravan? Posted by Customer
    A:
    Remove the two screws that attach the front impact sensor to the outer rails and take the sensor out of the vehicle.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What are the steps to replace the quarter panel mounted side impact sensor for the 2008 Dodge Challenger? Posted by Customer
    A:
    Remove the lower quarter trim panel, disconnect the electrical connector, remove the two retaining screws, and take out the quarter panel mounted side impact sensor.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What is the next step after disconnecting the battery for the 2006 Dodge Charger? Posted by Customer
    A:
    Remove the B-pillar trim panel and disconnect the electrical connector.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    Where should the side impact sensor be positioned for the 2007 Dodge Dakota? Posted by Customer
    A:
    Position the side impact sensor near the floor panel below the right or left outboard front seat adjuster riser.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What is crucial to remember before connecting the battery negative cable for the 2008 Dodge Magnum? Posted by Customer
    A:
    Do not connect the battery negative cable until the system test has been performed to avoid personal injury or death.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What should you do after disconnecting the battery for the 2006 Dodge Grand Caravan? Posted by Customer
    A:
    Open the sliding door fully, remove the two retaining screws from the impact sensor, disconnect the electrical connector, and take the sensor out of the vehicle.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    How should the SAS be positioned during installation for the 2003 Dodge Stratus? Posted by Customer
    A:
    Position the SAS in the B-pillar with the electrical connector facing forward.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What is the torque specification for tightening the screws when installing the new side impact sensor for the 2006 Jeep Commander? Posted by Customer
    A:
    The screws should be tightened to 8 N.m (70 in. lbs.).
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    How should the side impact sensor be handled for the 2007 Jeep Grand Cherokee? Posted by Customer
    A:
    Handle the side impact sensor with care, avoiding any strikes or drops, as damage or calibration issues may occur.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Impact Sensor, Front 4671779AC Designed for Proper Fit and Performance

The Mopar part 4671779AC Impact Sensor, Front comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Air Bag Sensor component functions as a reliable support element for essential vehicle systems through its engineered design. This part 4671779AC Impact Sensor, Front supports Jeep Grand Cherokee, Commander alongside Dodge Charger, Challenger, Dakota, Chrysler 300, Town & Country, Pacifica. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 4671779AC. The authentic Mopar component produced by Mopar functions as a Sensor - Impact; Air Bag Impact Sensor, Center, Front; Air Bag Sensor and fits into the Front of the vehicle.
The part 4671779AC uses durable material for construction and it weighs 0.50 Pounds while its dimensions are 1.8 x 2.6 x 3.8 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility and it also known by the names Front Impact Sensor; Side Impact Sensor; Airbag Impact Sensor.. This part 4671779AC is necessary for every vehicle. The inventory system lists this product with SKU: 4671779AC. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.