Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Mopar 4669569
Purge Valve

1998-2010 Mopar 4669569

Customer Questions & Expert Answers (18)
Mopar 4669569 Purge Valve
Mopar 4669569 Purge Valve
Mopar 4669569 Purge Valve
Mopar 4669569 Purge Valve
Mopar 4669569 Purge Valve
Mopar 4669569 Purge Valve
  • Part Description
    Solenoid - Proportional Purge; Vapor Canister Purge Solenoid
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 4669569 Purge Valve is Ref No. 10 in the diagram below

    2006 Dodge Ram 3500 Purge Valve Diagram for 4669569
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 4669569

  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2001 Chrysler 300MBase6 Cyl 3.5 L GAS
    1998-2000 Chrysler CirrusLX, LXi4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
    1998-2001 Chrysler ConcordeLX, LXi6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS
    1999-2001 Chrysler LHSBase6 Cyl 3.5 L GAS
    2001-2010 Chrysler PT CruiserBase, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring4 Cyl 2.4 L GAS
    2004-2006 Chrysler PacificaBase, Limited, Touring6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
    1998-2000 Chrysler SebringJX, JXi4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
    2001-2007 Chrysler Town & CountryBase, EL, EX, LX, LXi, Limited, Touring6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
    2001-2003 Chrysler VoyagerBase, Ec, LX4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
    2007-2008 Dodge CaliberR/T, SE, SRT-4, SXT4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Any idea if 4669569 will fit my car? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 4669569, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What is the first step to service and repair the Canister Purge Solenoid for the 2000 Chrysler Cirrus? Posted by Customer
    A:
    Begin by removing the negative battery cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    What are the steps to install the solenoid for the 2000 Chrysler 300M? Posted by Customer
    A:
    Install the solenoid back onto the bracket, reconnect the vacuum tube, and finally connect the electrical connector to the solenoid.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    What should be done after connecting the vacuum lines for the 2004 Chrysler Pacifica? Posted by Customer
    A:
    Install the solenoid back onto the bracket.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    Why is proper installation important for the 2001 Chrysler Concorde? Posted by Customer
    A:
    Proper installation is crucial for the solenoid to operate effectively.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    How should the solenoid be positioned during installation for the 2001 Chrysler LHS? Posted by Customer
    A:
    Position the solenoid on the bracket, ensuring the top marked with TOP is facing correctly.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    What is the second step after installing the vacuum lines for the 2008 Chrysler PT Cruiser? Posted by Customer
    A:
    Connect and lock the electrical connector to the purge solenoid.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    Where is the Canister Purge Solenoid located for the 2003 Chrysler Town & Country? Posted by Customer
    A:
    The Canister Purge Solenoid is located on a bracket near the radiator on the passenger side of the vehicle.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    What is the final step to complete the installation of the solenoid for the 2001 Chrysler Voyager? Posted by Customer
    A:
    Connect the vacuum tube and then the electrical connector to the solenoid.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    What should be done after removing the air inlet resonator assembly for the 2007 Dodge Caliber? Posted by Customer
    A:
    Disconnect the negative battery cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    What should be connected after installing the solenoid onto the bracket for the 2007 Dodge Caravan? Posted by Customer
    A:
    Connect the vacuum tube to the solenoid.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    What should be done after removing the solenoid from the bracket for the 2001 Dodge Grand Caravan? Posted by Customer
    A:
    Installation involves placing the solenoid back onto the bracket, ensuring that the TOP marking on the solenoid is oriented correctly for proper operation.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    How should the solenoid be positioned during installation for the 2001 Dodge Intrepid? Posted by Customer
    A:
    Position the solenoid on the bracket, ensuring the top marked with TOP is facing correctly.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    Where is the Proportional Purge Solenoid Valve located for the 2004 Dodge Neon? Posted by Customer
    A:
    It is attached to a bracket near the steering gear.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    What is the first step for installation of the solenoid for the 2005 Dodge Ram 1500? Posted by Customer
    A:
    Install the solenoid assembly to the mounting bracket.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    What is the first step to install the Canister Purge Solenoid for the 2007 Dodge Ram 3500? Posted by Customer
    A:
    Connect the vapor line quick-connect fitting 3 to the solenoid.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    What is the first step to remove the solenoid for the 2006 Dodge Ram 2500? Posted by Customer
    A:
    Disconnect the electrical wiring connector at the solenoid.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    Q:
    What is the first step to service and repair the Canister Purge Solenoid for the 2000 Dodge Stratus? Posted by Customer
    A:
    Begin by removing the negative battery cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Canister Purge Valve
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Purge Valve 4669569 Designed for Proper Fit and Performance

The Mopar part 4669569 Purge Valve comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Canister Purge Valve component functions as a reliable support element for essential vehicle systems through its engineered design. This part 4669569 Purge Valve supports Dodge Ram 1500, Grand Caravan, Ram 2500 alongside Chrysler Town & Country, Pacifica, Concorde. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 4669569. The authentic Mopar component produced by Mopar functions as a Solenoid - Proportional Purge; Vapor Canister Purge Solenoid.
The part 4669569 uses durable material for construction and it weighs 1.00 Pounds while its dimensions are 2.6 x 3.5 x 3.7 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility and it also known by the names Purge Solenoid; EGR Solenoid; Proportional and Linear Purge Solenoids.. This part 4669569 is necessary for every vehicle. The inventory system lists this product with SKU: 4669569. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.