Make sure this part fits

Mopar 4221463
Parking Brake Switch, Black

1984-2025 Mopar 4221463

Customer Questions & Expert Answers (12)
Mopar 4221463 Parking Brake Switch, Black
Mopar 4221463 Parking Brake Switch, Black
  • Part Description
    Switch - Parking Brake; Electronic Parking Brake Control Switch
  • Manufacturer
    Mopar
Make sure this part fits
$18.50 MSRP: $27.20
You Save: $8.70 (32%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2009 Chrysler AspenLimited, Limited Hybrid8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
    1993-1997 Chrysler ConcordeBase, LX, LXi6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
    1990-1993 Chrysler ImperialBase6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
    1994-1997 Chrysler LHSBase6 Cyl 3.5 L GAS
    1992-1994, 1989-1990 Chrysler LeBaronBase, GT, GTC, GTS, High Line, LE, LX, Landau, Premium4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
    1989-1996 Chrysler New YorkerBase, Fifth Avenue, Landau, Salon6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
    2004-2008 Chrysler PacificaBase, LX, Limited, Touring6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
    1989-1991 Chrysler TC MaseratiBase4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
    2011-2016, 1991-1995 Chrysler Town & Country30th Anniversary Edition, Base, LX, Limited, Limited Platinum, S, Touring, Touring L6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
    1989 Dodge AriesAmerica, LE4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Any idea if 4221463 will fit my car? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 4221463, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What is the first step to install the brake light switch for the 2007 Chrysler Aspen? Posted by Customer
    A:
    Disable the supplemental restraint system by disconnecting and isolating the battery negative cable and waiting two minutes for the system capacitor to discharge.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    How do you adjust the switch for the 2008 Chrysler Pacifica? Posted by Customer
    A:
    With the brake pedal fully released, move the lever on the back of the brake lamp switch from the angled non-adjusted position to the full vertical position.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What is the first step to service the brake light switch for the 2007 Dodge Dakota? Posted by Customer
    A:
    Disable the supplemental restraint system by disconnecting and isolating the battery negative cable and waiting two minutes for the system capacitor to discharge.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What is the process to remove the brake lamp switch for late production for the 2009 Dodge Journey? Posted by Customer
    A:
    Depress and hold the brake pedal, rotate the brake lamp switch housing counterclockwise about 30 degrees, pull the switch straight rearward from the keyed hole to remove it, release the brake pedal, and finally disconnect the wire harness connector from the switch.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What should be noted about the self-adjusting switch plunger for the 2007 Dodge Durango? Posted by Customer
    A:
    The self-adjusting switch plunger is a one-time feature; if the switch is removed from the mounting bracket, it must be replaced with a new switch.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What should be done after locating the brake lamp switch for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    Disconnect the wire harness connector from the brake lamp switch.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What should be removed after the lower column cover for the 2002 Dodge Ram 1500 Van? Posted by Customer
    A:
    Remove the Data Link Connector, hood release lever, and park brake release lever from the knee blocker.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    How do you unlock the brake lamp switch for the 2002 Dodge Ram 2500 Van? Posted by Customer
    A:
    With the brake pedal pressed and held in the applied position, rotate the brake lamp switch counterclockwise about 300 degrees to unlock it.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What happens if the plunger adjustment is not done correctly for the 2006 Dodge Ram 3500? Posted by Customer
    A:
    If not done correctly, a new brake lamp switch must be installed.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What is the first step to service the brake light switch for the 2007 Dodge Ram 2500? Posted by Customer
    A:
    Disable the supplemental restraint system by disconnecting and isolating the battery negative cable and waiting two minutes for the system capacitor to discharge.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What should be done after unlocking the brake lamp switch for the 2001 Dodge Ram 3500 Van? Posted by Customer
    A:
    Pull the switch straight out of the mounting bracket and release the brake pedal.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Parking Brake Switch, Black 4221463 Designed for Proper Fit and Performance

The Mopar part 4221463 Parking Brake Switch, Black comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Brake Light Switch component functions as a reliable support element for essential vehicle systems through its engineered design. This part 4221463 Parking Brake Switch, Black supports Jeep Grand Cherokee alongside Dodge Ram 1500, Dakota, Durango, Ram 1500, Dakota, 2500 and Chrysler Town & Country, Pacifica, Concorde. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 4221463. The authentic Mopar component produced by Mopar functions as a Switch - Parking Brake; Electronic Parking Brake Control Switch.
The part 4221463 uses durable material for construction and it weighs 0.40 Pounds while its dimensions are 1.5 x 1.6 x 2.6 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility and it also known by the names Parking Brake Warning Switch; Seat Adjuster, W/Bezel, Black Buttons, Woodgrain, W/Memory Opening.. This part 4221463 is necessary for every vehicle. The inventory system lists this product with SKU: 4221463. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.