Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Mopar 4861691AA
Throttle Body

2006-2011 Mopar 4861691AA

Customer Questions & Expert Answers (12)
Mopar 4861691AA Throttle Body
Mopar 4861691AA Throttle Body
Mopar 4861691AA Throttle Body
Mopar 4861691AA Throttle Body
Mopar 4861691AA Throttle Body
Mopar 4861691AA Throttle Body
  • Part Description
    Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body.
  • Replaces
    4861694AA
  • Manufacturer
    Mopar
Make sure this part fits
$292.31 MSRP: $430.00
You Save: $137.69 (33%)
Ships in 1-3 Business Days
1
ADD TO CART
  • 2010 Dodge Challenger Throttle Body Diagram for 4861691AA
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 4861691AA

  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2010 Chrysler 300
    2007-2008 Chrysler PacificaBase, LX, Limited, Touring6 Cyl 4.0 L GAS
    2007-2010 Chrysler SebringBase, LX, Limited, Touring6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
    2008-2010 Chrysler Town & CountryLimited, Touring, Touring Plus6 Cyl 4.0 L GAS
    2008-2010 Dodge AvengerR/T, SE, SXT6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
    2009-2010 Dodge Challenger
    2006-2010 Dodge Charger
    2008-2010 Dodge Grand CaravanSXT6 Cyl 4.0 L GAS
    2009-2010 Dodge JourneyCrew, R/T, SXT6 Cyl 3.5 L GAS
    2006-2008 Dodge Magnum
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Any idea if 4861691AA will fit my car? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 4861691AA, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    How should the throttle body and bolts be installed for the 2008 Chrysler 300? Posted by Customer
    A:
    Install the throttle body and bolts to the intake manifold, following a mandatory torque sequence by tightening the bolts in a criss-cross pattern to a specification of 5.5 Nm (50 in. lbs.).
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Throttle Body
    Q:
    What should be avoided during the installation for the 2008 Chrysler Pacifica? Posted by Customer
    A:
    Take care not to over torque, as excessive tightening can damage the throttle body, gaskets, bolts, or intake manifold.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Throttle Body
    Q:
    How should the throttle body be aligned during installation for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Align the throttle body with the intake manifold alignment pins.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Throttle Body
    Q:
    What is the first step to service and repair the throttle body on a 4.0L engine for the 2008 Chrysler Town & Country? Posted by Customer
    A:
    Disconnect and isolate the negative battery cable at the battery.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Throttle Body
    Q:
    What should be done after tightening the bolts for the 2010 Dodge Avenger? Posted by Customer
    A:
    Connect the electrical connector to the throttle body, install the clean air hose, and tighten the clamps to 4 Nm (35 in. lbs.).
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Throttle Body
    Q:
    What is the next step after torquing the throttle body for the 2010 Dodge Challenger? Posted by Customer
    A:
    Attach the throttle body support bracket to the bottom of the throttle body and tighten the bolts to 27 Nm (20 ft. lbs.).
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Throttle Body
    Q:
    What comes after disconnecting the inlet hose for the 2007 Dodge Charger? Posted by Customer
    A:
    Disconnect the electrical connectors and the vacuum hose.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Throttle Body
    Q:
    What is the following step after removing the nut from the throttle body bracket for the 2009 Dodge Journey? Posted by Customer
    A:
    Remove the bolt and the throttle body bracket.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Throttle Body
    Q:
    What should be inspected after removing the throttle body for the 2008 Dodge Grand Caravan? Posted by Customer
    A:
    Inspect the intake manifold to throttle body gasket for any damage and check the j-nuts for wear.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Throttle Body
    Q:
    What happens if the ETC Relearn is not performed for the 2007 Dodge Magnum? Posted by Customer
    A:
    Failure to perform this relearn will result in a Diagnostic Trouble Code (DTC) being set.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Throttle Body
    Q:
    What is the next step after disconnecting the electrical connector and vacuum lines for the 2007 Dodge Nitro? Posted by Customer
    A:
    Remove the four throttle body mounting bolts and take the throttle body off the intake manifold.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Throttle Body
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Throttle Body 4861691AA Designed for Proper Fit and Performance

The Mopar part 4861691AA Throttle Body comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Throttle Body component functions as a reliable support element for essential vehicle systems through its engineered design. This part 4861691AA Throttle Body supports Dodge Charger, Challenger, Grand Caravan alongside Chrysler 300, Town & Country, Pacifica. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 4861691AA. The authentic Mopar component produced by Mopar functions as a Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body..
The part 4861691AA uses durable material for construction and it weighs 2.40 Pounds while its dimensions are 6.4 x 7.1 x 7.9 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility. This product functions as a substitute for 4861694AA. This part 4861691AA is necessary for every vehicle. The inventory system lists this product with SKU: 4861691AA. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.