Make sure this part fits

Mopar 5183761AD
Outer Tie Rod

2004-2020 Mopar 5183761AD

Customer Questions & Expert Answers (11)
Mopar 5183761AD Outer Tie Rod
Mopar 5183761AD Outer Tie Rod
  • Part Description
    Tie Rod - Outer; Steering Tie Rod End, Outer; Drag Link Repair Kit; Outer Tie Rod End
  • Position
    Outer
  • Replaces
    5183761AC, 5183761AB, 68014944AA, 5183761AA, 68141058AA, 5103320AB, 5103320AA, 68033477AA
  • Manufacturer
    Mopar
Make sure this part fits
$67.75 MSRP: $99.95
You Save: $32.20 (33%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2011-2014 Chrysler 200LX, Limited, S, Touring4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
    2004-2008 Chrysler PacificaBase, LX, Limited, Touring6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
    2007-2010 Chrysler SebringBase, LX, Limited, Touring4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
    2005-2007 Chrysler Town & CountryBase, LX, Limited, Touring6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
    2008-2014 Dodge AvengerExpress, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
    2007-2012 Dodge CaliberExpress, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
    2005-2007 Dodge CaravanBase, C/V, SE, SXT4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
    2005-2007 Dodge Grand CaravanBase, C/V, SE, SE Plus, SXT6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
    2009-2020 Dodge JourneyAVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
    2007-2017 Jeep Compass75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 5183761AD works for my vehicle? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 5183761AD, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What is the torque specification for tightening the nut on the outer tie rod for the 2008 Chrysler Pacifica? Posted by Customer
    A:
    While holding the stud stationary with a socket, tighten the nut using a crowfoot wrench on a torque wrench to 47 Nm (35 ft. lbs.), then turn the nut an additional 1/2 (180°) turn.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod End
    Q:
    What is the first step in installing the bellows for the 2009 Chrysler Sebring? Posted by Customer
    A:
    Loosely place a NEW clamp over the large end of the NEW bellows, then slide the bellows with the clamp over the end of the inner tie rod and onto the gear body.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod End
    Q:
    What is the next step after removing the outer tie rod for the 2007 Chrysler Town & Country? Posted by Customer
    A:
    Remove the tie rod jam nut from the inner tie rod.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod End
    Q:
    How should the travel restrictor be installed for the 2010 Dodge Avenger? Posted by Customer
    A:
    Install it with the flat side of the teeth facing out on the inboard end of the inner tie rod ball joint.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod End
    Q:
    What should you do after installing the tire and wheel assembly for the 2008 Dodge Caliber? Posted by Customer
    A:
    Lower the vehicle and adjust the front wheel toe setting.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod End
    Q:
    What should you do after removing the outer tie rod for the 2005 Dodge Caravan? Posted by Customer
    A:
    Take off the tie rod jam nut from the inner tie rod, remove the clamp securing the bellows to the inner tie rod, and detach the bellows from the steering gear body and transfer tube.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod End
    Q:
    What is the final step in the process for the 2005 Dodge Grand Caravan? Posted by Customer
    A:
    Tighten the tie rod jam nut to 75 Nm (55 ft. lbs.) torque, ensuring the steering gear boot does not become twisted, and adjust the front toe setting on the vehicle.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod End
    Q:
    What additional step is needed if servicing the right inner tie rod for the 2009 Dodge Journey? Posted by Customer
    A:
    Position the heat shield over the steering gear, install mounting screws and push-pins, and tighten the screws to 6 Nm (53 in. lbs.).
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod End
    Q:
    What should you hold while loosening and removing the nut for the 2008 Jeep Compass? Posted by Customer
    A:
    The tie rod end stud with a wrench.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod End
    Q:
    Why is it important to count the revolutions when unscrewing the outer tie rod for the 2008 Jeep Patriot? Posted by Customer
    A:
    It helps in setting the wheel alignment.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod End
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Outer Tie Rod 5183761AD Designed for Proper Fit and Performance

The Mopar part 5183761AD Outer Tie Rod comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Tie Rod End component functions as a reliable support element for essential vehicle systems through its engineered design. This part 5183761AD Outer Tie Rod supports Jeep Patriot, Compass alongside Dodge Grand Caravan, Journey, Caravan, Chrysler 200, Town & Country, Pacifica. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 5183761AD. The authentic Mopar component produced by Mopar functions as a Tie Rod - Outer; Steering Tie Rod End, Outer; Drag Link Repair Kit; Outer Tie Rod End and fits into the Outer of the vehicle.
The part 5183761AD uses durable material for construction and it weighs 1.60 Pounds while its dimensions are 2.5 x 7.9 x 10.5 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility and it also known by the names Tie Rod End Outer; Tie Rod End. This product functions as a substitute for 5183761AC, 5183761AB, 68014944AA, 5183761AA, 68141058AA, 5103320AB, 5103320AA, 68033477AA. This part 5183761AD is necessary for every vehicle. The inventory system lists this product with SKU: 5183761AD. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.