Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Mopar 5174039AB
Pressure Switch

1996-2014 Mopar 5174039AB

Customer Questions & Expert Answers (27)
Mopar 5174039AB Pressure Switch
Mopar 5174039AB Pressure Switch
Mopar 5174039AB Pressure Switch
Mopar 5174039AB Pressure Switch
Mopar 5174039AB Pressure Switch
Mopar 5174039AB Pressure Switch
  • Part Description
    Valve - A/C Pressure Transducer; Refrigerant, HVAC, Compressor, Trinary Switches
  • Replaces
    5175684AA, 5189363AA, 5096084AA, 5174039AA
  • Manufacturer
    Mopar
Make sure this part fits
$118.97 MSRP: $175.00
You Save: $56.03 (33%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • 5174039AB Pressure Switch is Ref No. 9 in the diagram below

    2011 Chrysler 300 Pressure Switch Diagram for 5174039AB
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 5174039AB

  • Vehicle Fitment

    Year Make Model Trim Engine
    2011 Chrysler 200LX, Limited, S, Touring4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
    2006-2012 Chrysler 300Base, C, C Luxury, C SRT8, LX, Limited, S, SRT8, Signature Series, Touring6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
    2007-2009 Chrysler AspenLimited, Limited Hybrid8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
    2000 Chrysler Grand VoyagerBase, SE6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
    2003 Chrysler PT CruiserGT4 Cyl 2.4 L GAS
    2004-2008 Chrysler PacificaBase, LX, Limited, Touring6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
    2006-2010 Chrysler SebringBase, LX, Limited, TSi, Touring4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
    1996-2011 Chrysler Town & CountryBase, EL, EX, LX, LXi, Limited, SX, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
    2000-2003 Chrysler VoyagerBase, Ec, LX, SE4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
    2008-2011 Dodge AvengerExpress, Heat, Lux, Mainstreet, R/T, SE, SXT4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 5174039AB works for my vehicle? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 5174039AB, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What is the final step in the installation process for the 2008 Chrysler 300? Posted by Customer
    A:
    Reconnect the negative battery cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What should be done with the O-ring seal for the 2008 Chrysler Aspen? Posted by Customer
    A:
    Finally, remove and discard the O-ring seal from the discharge line fitting.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What is the final step after completing the installation for the 2005 Chrysler Pacifica? Posted by Customer
    A:
    Reconnect the negative battery cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What type of O-ring should be used for the Refrigerant Pressure Sensor / Switch installation for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Use only the specified O-ring made of special material for R-134a.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What is the final step in the installation process for the 2007 Chrysler Town & Country? Posted by Customer
    A:
    Reconnect the negative battery cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What is the first step to service the Refrigerant Pressure Sensor/Switch for the 2001 Chrysler Voyager? Posted by Customer
    A:
    Disconnect and isolate the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What type of O-ring should be used for the installation for the 2009 Dodge Caliber? Posted by Customer
    A:
    Only the specified O-ring made of special material for R-134a should be used.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What is the final step in the installation process for the 2008 Dodge Avenger? Posted by Customer
    A:
    Reconnect the negative battery cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What should be done before installing the transducer for the 2000 Dodge Caravan? Posted by Customer
    A:
    Replace the transducer O-ring.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    Where should the A/C pressure transducer be installed for the 2008 Dodge Challenger? Posted by Customer
    A:
    The A/C pressure transducer should be installed onto the A/C liquid line.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What is the first step to replace the A/C pressure transducer for the 2009 Dodge Charger? Posted by Customer
    A:
    First, disconnect and isolate the negative battery cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    How should the new rubber O-ring seal be prepared before installation for the 2009 Dodge Dakota? Posted by Customer
    A:
    The new rubber O-ring seal should be lubricated with clean refrigerant oil.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What should be done with the O-ring seal from the discharge line fitting for the 2006 Dodge Durango? Posted by Customer
    A:
    Discard the O-ring seal.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What is the first step to service the front A/C pressure transducer for the 2009 Dodge Journey? Posted by Customer
    A:
    Disconnect and isolate the negative battery cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What type of O-ring seal should be used for the A/C pressure transducer for the 2009 Dodge Grand Caravan? Posted by Customer
    A:
    The specified O-ring seal made of special material for R-134a.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What type of O-ring should be used for the Refrigerant Pressure Sensor / Switch installation for the 2008 Dodge Magnum? Posted by Customer
    A:
    Use only the specified O-ring made of special material for R-134a.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What is the final step in replacing the A/C pressure transducer for the 2008 Dodge Nitro? Posted by Customer
    A:
    Finally, remove the A/C pressure transducer from the A/C liquid line and discard the O-ring seal.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What is the first step to service the A/C pressure transducer for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    First, disconnect and isolate the negative battery cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What is the first step to service and repair the Refrigerant Pressure Sensor / Switch for the 2004 Dodge Ram 2500? Posted by Customer
    A:
    Begin by disconnecting and isolating the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What is the first step to replace the A/C pressure transducer for the 2007 Dodge Ram 3500? Posted by Customer
    A:
    First, disconnect and isolate the negative battery cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What is the first step to replace the A/C pressure transducer for the 2007 Jeep Compass? Posted by Customer
    A:
    Disconnect and isolate the negative battery cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What is the first step to service the A/C pressure transducer for the 2006 Dodge Stratus? Posted by Customer
    A:
    Disconnect and isolate the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    Where should the O-ring seal be installed for the 2008 Jeep Grand Cherokee? Posted by Customer
    A:
    The O-ring seal should be installed onto the discharge line fitting.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    What type of refrigerant oil should be used for the A/C compressor for the 2008 Jeep Patriot? Posted by Customer
    A:
    Only the required refrigerant oil for the A/C compressor should be used.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    Is it necessary to discharge the refrigerant system to replace the A/C low pressure switch for the 2007 Jeep Liberty? Posted by Customer
    A:
    No, it is not necessary to discharge the refrigerant system.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    Q:
    How should the new rubber O-ring seal be prepared before installation for the 2008 Jeep Wrangler? Posted by Customer
    A:
    The new rubber O-ring seal should be lubricated with clean refrigerant oil.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this HVAC Pressure Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Pressure Switch 5174039AB Designed for Proper Fit and Performance

The Mopar part 5174039AB Pressure Switch comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar HVAC Pressure Switch component functions as a reliable support element for essential vehicle systems through its engineered design. This part 5174039AB Pressure Switch supports Jeep Wrangler, Grand Cherokee, Liberty alongside Dodge Charger, Challenger, Ram 1500, Ram 1500, Dakota, 2500 and Chrysler 300, 200, Town & Country. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 5174039AB. The authentic Mopar component produced by Mopar functions as a Valve - A/C Pressure Transducer; Refrigerant, HVAC, Compressor, Trinary Switches.
The part 5174039AB uses durable material for construction and it weighs 0.40 Pounds while its dimensions are 1.1 x 1.2 x 2.4 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility and it also known by the names Pressure Transducer; Includes O-Ring and Item #4; Discharge Line Valve.. This product functions as a substitute for 5175684AA, 5189363AA, 5096084AA, 5174039AA. This part 5174039AB is necessary for every vehicle. The inventory system lists this product with SKU: 5174039AB. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.