2000 Chrysler Concorde Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2000 Chrysler Concorde

• Q:

  How to Replace an Air Bag Control Module in a Six-Passenger on 2000 Chrysler Concorde?

  A:

  In order to change the Air Bag Control Module, one has to take off the negative battery cable, open the glove box and take off the screws and panels. Unplug the ORC connector, uninstall the module, and install a new ORC making sure that they are properly aligned. Check airbag system reassemble and complete then reconnect battery.
• Q:

  How to Remove and Install a Clock Spring Assembly on 2000 Chrysler Concorde?

  A:

  To take out the Clock Spring Assembly, align the front wheels, lock the steering column and disconnect the battery. Remove the airbag module and steering wheel to get the Clock Spring. Disconnect connectors, replace Clock Spring and reassemble making sure to set the torque and connections. Do an airbag system check before reconnecting the battery.
• Q:

  How to Maintain the Airbag on 2000 Chrysler Concorde?

  A:

  To service the Passenger air bag Module, partially remove the instrument panel, disconnect the negative battery cable. Remove the glove box door, endcaps and trim panels. Dismount various electrical connectors, lower the steering column and remove mounting bolts. Finally, replace the air bag module and reverse the steps to remove the air bag module for installation.