2000 Dodge Durango Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2000 Dodge Durango

• Q:

  Is Your Clock Spring Faulty or Damaged, and What Steps Should You Take on 2000 Dodge Durango?

  A:

  Replace the Clock Spring If the clock spring is faulty or the driver side airbag has deployed, then it cannot be repaired. Disconnect the battery, wait two minutes and follow steps to remove and install the Clock Spring, making sure that the connection is made well and that the components are secure, to prevent them from being deployed accidentally.
• Q:

  What Steps Should Be Taken with an Airbag System Post-Collision on 2000 Dodge Durango?

  A:

  Handle Air Bag Systems Carefully Following a collision. Keep electrical sources off modules that have not deployed, carry them with the air bag side away from the module, and disarm the system when servicing components associated with the system. Properly store modules and wear protective gear when cleaning up. Place deployed modules in the scrap pile.
• Q:

  How to Safely Diagnose or Service the Air Bag Control Module on 2000 Dodge Durango?

  A:

  Before servicing the air bag Control Module, the battery negative cable should be disconnected and wait for two minutes. Do not hit the module (if dropped replace it). To remove, disconnect the wire harness and screws, insert the new module with proper orientation and connections, without reconnecting the battery yet.