2000 Dodge Grand Caravan Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2000 Dodge Grand Caravan

• Q:

  What Actions Are Necessary When an Airbag Deploys Without a Collision on 2000 Dodge Grand Caravan?

  A:

  After a collision, replace the Driver air bag Module and Clock Spring assembly if deployed, as they cannot be reused. For a deployed Passenger air bag Module not due to a collision, replace it and the Upper instrument panel. Inspect and replace any damaged components in both air bag systems.
• Q:

  How Can Clock Spring Ensure Safe Servicing of Airbag System Components on 2000 Dodge Grand Caravan?

  A:

  Disconnection of the battery negative cable will allow preventable accidental deployment of air bag parts before servicing them. Give the capacitor a chance of two minutes to discharge. Disassemble the driver air bag, steering wheel, and Clock spring and repeat the steps in reverse assembling and ensure the battery is not connected during testing.
• Q:

  How to Service an Air Bag Control Module on 2000 Dodge Grand Caravan?

  A:

  To service the Air Bag Control Module, disconnect the negative battery cable and wait two minutes. Remove the lower console, heat duct, and right instrument panel support. Disconnect the ACM connectors, remove the ACM bracket, and install the new assembly without removing safety-torqued bolts. Complete air bag tests before reconnecting the battery.