2000 Dodge Intrepid Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2000 Dodge Intrepid

• Q:

  What Needs Replacement After an Airbag Deployment in a Collision on 2000 Dodge Intrepid?

  A:

  The Driver air bag Module, Clock Spring Assembly, Steering Wheel and Complete Steering Column Assembly cannot be reused, and thus should be changed after a collision. Moreover, all the broken driver air bag system parts must be substituted. Passenger air bag Module and Instrument panel should also be changed in case they are broken.
• Q:

  How to Safely Replace the Air Bag Control Module in a Five-Passenger on 2000 Dodge Intrepid?

  A:

  To change the Air Bag Control Module, remove the negative battery cable. Remove components as needed such as the Instrument Panel and Console side panels to access the Occupant Restraint Controller (ORC). Disconnect the ORC, remove mounting screws and install the new module. Reconnect to the battery and check the air bag system.
• Q:

  How to Remove and Install a Clock Spring Assembly on 2000 Dodge Intrepid?

  A:

  To take out the Clock Spring Assembly, align the front wheels, lock the steering column and disconnect the battery. Remove the airbag module and steering wheel to get the Clock Spring. Disconnect connectors, replace Clock Spring and reassemble making sure to set the torque and connections. Do an airbag system check before reconnecting the battery.