2000 Dodge Intrepid Catalytic Converter, Exhaust Manifold, Exhaust Hanger, Exhaust Pipe

Catalytic Converter, Exhaust Manifold, Exhaust Pipe Installation and Repair Tips for 2000 Dodge Intrepid

• Q:

  How to Properly Maintain Catalytic Converters on Both Sides on 2000 Dodge Intrepid?

  A:

  The procedure involves service of the right catalytic converter by first cooling the exhaust system, lifting the vehicle and drainage of the exhaust. Turn off the oxygen sensor, and pull out the converter and put on a new V-Band clamp. In the case of the left converter, repeat, but with correct torque specifications and replacement of parts.
• Q:

  How to Maintain the Right and Left Exhaust Manifold on 2000 Dodge Intrepid?

  A:

  To maintain the exhaust manifold, loosen the negative cable, air intake plenum and EGR tube bolts. Take off the oxygen sensor and V-Band clamp. Connect the new manifold and gaskets, connecting the bolts in the center and outwards. Re-Install components, as per right torque requirements, and re-connect the negative cable.
• Q:

  How to Service and Repair the Exhaust Pipe and Rear Resonator on 2000 Dodge Intrepid?

  A:

  To service the tailpipe and rear resonator you will need to remove the exhaust system and loosen the assembly clamp. Remove and place the assembly onto the rear module, loosely attach the clamp and reinstall the exhaust system. Finally, tighten all band clamps to 61Nm (45 ft. lbs.).