2000 Dodge Ram 3500 Camshaft, Timing Chain, Timing Cover, Cam Gear

Camshaft, Timing Chain, Timing Cover Installation and Repair Tips for 2000 Dodge Ram 3500

• Q:

  How to Maintain and Fix a Timing Chain on 2000 Dodge Ram 3500?

  A:

  In order to fix the timing chain, the battery should be disconnected, Timing Chain Cover should be removed, and timing marks should be aligned by turning the crankshaft. Take out timing chain and camshaft sprocket. Install the sprockers and chain making sure that they are aligned, tighten the camshaft bolt. Measure end play of check camshaft and fit up cover.
• Q:

  How to Effectively Service and Repair a Timing Cover on 2000 Dodge Ram 3500?

  A:

  When repairing the timing cover, disconnection of battery, removal of water pump and other parts, and the removal of chain case cover is necessary. Install a new gasket and apply sealant and assemble carefully. Tighten all the bolts to the given torque, refit the water pump, and ensure that there is no leakage after engine start up.
• Q:

  How to Remove and Install a Camshaft on 2000 Dodge Ram 3500?

  A:

  To remove the camshaft, you'll need to remove the radiator, A/C condenser, engine cover, intake manifold and cylinder head covers. Remove the timing case cover, timing chain, rocker arms, push rods and tappets. Install a long bolt in the camshaft for removal, lubricate it and follow some installation instructions. Reassemble all the parts and check for leaks.