2000 Dodge Viper Sway Bar Link, Sway Bars, Sway Bar Bracket, Sway Bar Bushing

Sway Bar Bushing, Sway Bar Link Installation and Repair Tips for 2000 Dodge Viper

• Q:

  How to Service and Repair a Rear Sway Bar Bushing on 2000 Dodge Viper?

  A:

  In order to replace the rear sway bar bushing, raise up the vehicle and take away the bushing retainers. Unscrew the old bushings, clean the sway bar and fix new bushings. Install the retainers again and attach the sway bar to the frame, screwing bolts to 68 Nm (50 ft. lbs), and then drop the car.
• Q:

  How to Service a Sway Bar Link in the Rear on 2000 Dodge Viper?

  A:

  To service the rear sway bar link, raise the vehicle, remove the rear wheel, and loosen the link nut on the lower control arm. Detach the link using a center punch, then remove the nut from the sway bar. Use Puller MB991113 to separate the link. Reinstall and torque to specifications.