2000 Jeep Grand Cherokee Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2000 Jeep Grand Cherokee

• Q: How to Replace a Faulty Driver Side Airbag Module on 2000 Jeep Grand Cherokee?

  A: To replace a bad driver side air bag module, disconnect the battery negative cable and wait two minutes if the air bag has not deployed. Remove screws, disconnect wire harnesses and replace module. Make sure there is no foreign matter getting in, reconnect the components and tighten screws to 10.2 Nm. Do not reconnect the battery but yet.
• Q: How to Properly Replace and Install a Faulty Clock Spring on 2000 Jeep Grand Cherokee?

  A: Replace the Clock Spring if the Clock Spring is faulty or if the driver side air bag has deployed Disconnect the battery, wait for two minutes, and make sure that the front wheels are straight. Remove the air bag module, steering wheel and Clock Spring. Center the new Clock Spring, reassemble and reconnect all the parts.
• Q: How to Properly Diagnose, Service, and Replace an Air Bag Control Module on 2000 Jeep Grand Cherokee?

  A: Before servicing the air bag Control Module, first disconnect the battery negative cable and wait 2 minutes. Do not knock over the module, replace if dropped. To remove, disconnect the battery, take out the center console and unscrew the module. For installation purposes, secure the new module and reconnect components without reconnecting the battery yet.