2001 Chrysler PT Cruiser Wiper Motor, Windshield Wiper, Windshield Washer Fluid Reservoir, Wiper Arm

Windshield Washer Fluid Reservoir, Wiper Arm, Wiper Motor Installation and Repair Tips for 2001 Chrysler PT Cruiser

• Q:

  How to Replace a Rear Wiper Arm on 2001 Chrysler PT Cruiser?

  A:

  To install a new rear wiper arm, loosen the nut cap and the retaining nut and remove the arm to install a new one with a battery terminal puller. Make sure the wiper module is parked, line the new arm along the park line, fit it and check the functioning once the nut cap has been reattached.
• Q:

  How to Service a Wiper Motor on 2001 Chrysler PT Cruiser?

  A:

  Removing the front windshield wiper motor requires disconnection of the battery, wiper arm and cowl cover and deconnection of the wiper motor harness. Take off wiper module and motor then place in the new motor and reassemble. Make sure that the wiper system is in the PARK before the wiper arms are reassembled. Reattach the battery and test it.
• Q:

  How to Maintain and Fix a Windshield Washer Fluid Reservoir on 2001 Chrysler PT Cruiser?

  A:

  In order to fix the windshield washer reservoir, open the hood, switch on the wipers and disconnect the battery. Take off the right cowl cover, reservoir screws, pump connector and hoses. In case of necessity change pump to another reservoir, replace all, reconnect battery, and check.