2001 Chrysler PT Cruiser Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2001 Chrysler PT Cruiser

• Q:

  How to Safely Service and Repair a Clock Spring Assembly on 2001 Chrysler PT Cruiser?

  A:

  The Clock Spring Assembly can only be repaired by making sure that the deployed airbag is not face down. Unscrew the negative cable of the battery and wait two minutes. The steering wheel and shrouds are removed to reach the Clock Spring. Change when defective, and re-fit, making sure that it is well wired and connected, then test airbag system.
• Q:

  How to Safely Remove and Install an Air Bag Control Module on 2001 Chrysler PT Cruiser?

  A:

  The Occupant Restraint Controller or Air Bag Control Module is a device that activates front air bags. Disconnection of the battery negative cable should be made in order to prevent inadvertent deployment during system work. Once the capacitor has been discharged, loosen the center console and module, and replace all items. During the reconnection test the system and replace the battery.
• Q:

  What Needs Inspection and Replacement After Airbag Deployment on 2001 Chrysler PT Cruiser?

  A:

  After deploying a Driver air bag Module, replace the Driver air bag Module Clock Spring assembly, Steering Column Assembly, and Lower Steering Column Coupler, inspecting and replacing any damaged hardware and instrument panel components. Similarly, replace the Passenger air bag Module and Cover, inspecting for and replacing any damaged parts.