2001 Dodge Dakota Catalytic Converter, Exhaust Manifold, Exhaust Hanger, Exhaust Pipe

Catalytic Converter, Exhaust Manifold, Exhaust Pipe Installation and Repair Tips for 2001 Dodge Dakota

• Q:

  How to Detect Overheating and Internal Damage in a Catalytic Converter's Stainless Steel Body on 2001 Dodge Dakota?

  A:

  Look at the stainless steel body of the catalytic converter whether it has any form of bulging or distortion, which could be an indication of overheating. Ensure that the heat shield is not bent. In case of suspicion of internal catalyst damage, a mallet strike to the bottom should be made very gentle to determine if the core is broken.
• Q:

  How to Maintain and Fix an Exhaust Manifold on 2001 Dodge Dakota?

  A:

  To service the exhaust manifold, clean the cylinder head and exhaust manifold surfaces with solvent and blow dry with compressed air. Inspect the manifold for cracks and check the mating surfaces for flatness using a straight edge, make sure they are flat to within 0.1 mm (0.004 inch) overall.
• Q:

  How to Properly Service and Repair an Exhaust Pipe on 2001 Dodge Dakota?

  A:

  1. To fix the exhaust pipe, put the vehicle in the air and add Mopar Rust Penetrant to bolts. Disassemble oxygen sensor and take off clamps and nuts required. Check and re-check damaged components. Install the exhaust pipe again, screwing the nuts to designated torque, reconnect the sensor and verify whether there are any leaks and alignments.