2001 Dodge Intrepid Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2001 Dodge Intrepid

• Q:

  How to Service an Air Bag Control Module for Side Impact on 2001 Dodge Intrepid?

  A:

  To service the Side Impact air bag Control Module, disconnect the battery negative cable, remove the B-pillar trim lower and disconnect the electrical connector of the module. Remove the module and then install the new one, torque screws to 12 Nm, reconnect the electrical connector and reinstall the trim. Complete diagnostics prior to reattaching battery.
• Q:

  How to Maintain an Airbag in Your Seat on 2001 Dodge Intrepid?

  A:

  To replace the seat air bag, adjust the front seat seat forward, disconnect battery and wait two minutes. Take off the back cover and trim cover and then get at the air bag. Unscrew the electrical connector and air bag and screw the new one in, with appropriate alignment and connection to the rest before re-assembling.
• Q:

  How to Maintain and Fix a Clock Spring on 2001 Dodge Intrepid?

  A:

  To fix Clock Spring Assembly, one should position the front wheels, align the steering column, and disconnect the battery. Detach the Clock Spring, the airbag and steering wheel. Install new Clock Spring, re-install components and make sure of the right torque setting. Check the air bag system by reconnecting the battery.