Powertrain Control

2001 Dodge Neon Oxygen Sensor, Engine Control Module, Camshaft Position Sensor, Knock Sensor

Currently shopping for
2001 Dodge Neon
Change Vehicle
Vehicle Options
4 Cyl 2.0 L GAS
Vehicle Options
4 Cyl 2.0 L GAS
Categories Close X

Currently selected

Other Categories

A/C & Heating
Belts & Cooling
Body & Hardware
Brakes
Charging & Starting
Driveline & Axles
Electrical
Emission Control & Exhaust
Engine
Headlights & Lighting
Interior & Exterior Trim
Maintenance & Lubrication
Steering
Suspension
Transmission
Categories Close X
Diagram (1 of 1): Engine / Transaxle - Air Intake
2001 Dodge Neon Powertrain Control Diagram
Enlarge Diagram
Sort by:
Ref No.
Ref No.
Part No. & Part Description
Price & Qty.
Part No. &
Part Description

OEM 2001 Dodge Neon Parts for Powertrain Control

Authentic OEM Dodge components offer both excellent performance and a long service life. These genuine 2001 Dodge Neon parts are made of high quality materials to ensure they are as durable and strong as possible. The suitable option for vehicle maintenance, they are easy to install as per the instructions of the factory. To get new OE Powertrain Control parts, select JeepPartsDeal.com. We offer authentic OEM 2001 Dodge Neon Oxygen Sensor, Engine Control Module, Camshaft Position Sensor, Knock Sensor with manufacturer warranties, fair prices, a simple return policy and fast shipping.

Camshaft Position Sensor, Knock Sensor, Oxygen Sensor Installation and Repair Tips for 2001 Dodge Neon

  • Q:
    How to Locate, Remove, and Install a Knock Sensor on 2001 Dodge Neon?
    A:
    The starter is disconnected with a crow foot socket and the knock sensor is pulled out by disconnecting its electrical connector by using a crow foot socket, which is on the cylinder block. Install a new sensor by threading it and tightening it to a minimum force of 10Nm (7 ft.lb) to perform well, and reconnect the electrical connector.
  • Q:
    How to Replace the Upstream 1/1 Oxygen Sensor on 2001 Dodge Neon?
    A:
    In order to change the upstream 1/1 oxygen sensor, lift the car up and disconnect the connector. A crow foot wrench can be used to loosen the sensor, clean up the threads and apply some anti-seize when reusing. Install the new sensor using wrench, tighten it to 28 Nm, reconnect the connector and lower the vehicle.
  • Q:
    How to Remove and Install a Camshaft Position Sensor on 2001 Dodge Neon?
    A:
    To remove the camshaft position sensor, disconnect the brake booster hose and electrical connector and disconnect the paints of the camshaft position sensor and remove the screws. Loosen the target magnet screw, install the magnet in and tighten to 3.4 Nm. Reinstall the sensor, tighten to 9Nm and reconnect all.
See All Installation and Repair Tips