2001 Dodge Ram 1500 Van Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2001 Dodge Ram 1500 Van

• Q:

  How to service the Air Bag Control Module on 2001 Dodge Ram 1500 Van?

  A:

  To service the air bag Control Module, remove the battery negative cable and wait two minutes. Remove the cover, the wire harness and unscrew the ACM. Install the new ACM, secure it, reconnect the harness and clean the area and seal the cover. Do not reconnect the battery until the testing is complete.
• Q:

  After an Airbag deployment, what components must be replaced and what safety precautions should be followed during cleanup on 2001 Dodge Ram 1500 Van?

  A:

  After air bag deployment takes place, replace both air bags, seat belt tensioners, and other parts, which may be damaged. Inspect other parts for visible damage. During cleanup, wear safety gear to prevent sodium hydroxide residue. Remove air bags and vacuum the entire inside of the vehicle including heater and AC outlets.
• Q:

  What steps should be followed to replace a faulty Clock Spring on 2001 Dodge Ram 1500 Van?

  A:

  Replace the Clock Spring if it is faulty or after airbag deployment since it cannot be fixed. Turn off the airbag system, remove the steering wheel and shrouds, disconnect wire harnesses and lock down the Clock Spring. Reinstall components (ensure pieces are aligned and torque specifications are met), reconnect airbag and steering wheel.