2001 Dodge Ram 3500 Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2001 Dodge Ram 3500

• Q:

  How to Service an Air Bag Control Module on 2001 Dodge Ram 3500?

  A:

  In order to service the air bag Control Module, disconnect the battery negative cable and wait 2 minutes. Be careful not to damage the impact sensor. For removing, follow certain steps for manual and automatic transmissions. Always replace the module and the bracket as a unit. Reinstall carefully and make a verification test before reconnecting the battery.
• Q:

  What Steps Should Be Taken After an Airbag Deployment on 2001 Dodge Ram 3500?

  A:

  After air bag deployment, replace both air bags together with driver air bag trim cover, Clock Spring, and steering column assembly as they might be damaged. Wear safety gear when performing the cleanup to prevent irritation from powder residue. Vacuum the inside thoroughly including heater and air conditioning outlets to remove all powder.
• Q:

  How to Replace a Faulty Clock Spring on 2001 Dodge Ram 3500?

  A:

  Replace the Clock Spring in case of any fault or after the deployment of a driver air bag as it is not repairable. Disable the air bag system and remove the driver air bag and necessary components. Install the new Clock Spring making sure to center it, and re-assemble all parts, including the steering wheel and air bag.