2002 Chrysler Prowler Catalytic Converter, Exhaust Manifold, Exhaust Hanger, Exhaust Pipe

Catalytic Converter, Exhaust Manifold, Exhaust Pipe Installation and Repair Tips for 2002 Chrysler Prowler

• Q:

  How to Maintain an Exhaust Pipe for Optimal Performance on 2002 Chrysler Prowler?

  A:

  To service the exhaust pipe, raise the vehicle and support the muffler. Use penetrating oil on the band clamp and a soap solution for rubber isolators. Remove the tailpipe(s), install them without tightening, align the isolators, and tighten the clamps to 47 Nm before lowering the vehicle.
• Q:

  How to Remove and Install the Left Exhaust Manifold on 2002 Chrysler Prowler?

  A:

  To remove the left exhaust manifold, disconnect the battery, remove the left hood panel and remove the Power Distribution Center. Unplug the catalytic converter and oxygen sensor and remove the heat shields and manifold. Inspect for damage, then reinstall with new clamps and stipulated torque settings. Reconnect the components and reconnect the battery.
• Q:

  How to Maintain and Fix a Catalytic Converter on 2002 Chrysler Prowler?

  A:

  To repair the catalytic converter, disconnect the battery, raise the car and remove the oxygen sensor. Support the exhaust, loosen clamps and remove the converter. Inspect for problems, but replace it, making sure to identify the cause of failure. Reinstall components tightening all connections appropriately.