2002 Dodge Dakota Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2002 Dodge Dakota

• Q:

  What Actions Are Necessary After an Airbag Deployment on 2002 Dodge Dakota?

  A:

  After a supplemental restraint deployment, replace deployed restraints and, if the driver airbag deployed, the Clock Spring and steering column assembly. Inspect and restore the airbag Control Module's mounting surfaces. Cleanup requires safety gear due to powder residue. Dispose of damaged restraints per regulations and vacuum the interior thoroughly.
• Q:

  How to Service an Air Bag Control Module on 2002 Dodge Dakota?

  A:

  To service the air bag Control Module, you need to disconnect the battery negative cable and wait two minutes. Remove the floor duct adapter and carpet to get to the module. Disconnect the wire harness, replace the module, and make sure that it is properly installed. Do not reconnect the battery until the verification test is finished.
• Q:

  How to Replace a Faulty Clock Spring on 2002 Dodge Dakota?

  A:

  Replace Clock Spring in case of faulty clock spring or after airbag deployment as it cannot be repaired. Disable the airbag system, cut off the steering wheel and shrouds and disconnect the Clock Spring and install a new one. Reassemble parts by taking proper alignment and torque requirements and attach the airbag once again.