2002 Dodge Dakota Catalytic Converter, Exhaust Manifold, Exhaust Hanger, Exhaust Pipe

Catalytic Converter, Exhaust Manifold, Exhaust Pipe Installation and Repair Tips for 2002 Dodge Dakota

• Q:

  How to Service and Repair an Exhaust Manifold on 2002 Dodge Dakota?

  A:

  To repair the exhaust manifold, remove the battery, jack up the car and remove exhaust pipe. Remove heat shields, then manifold by bolts and nuts. Clean surfaces, check for cracks, and replace the studs if necessary. Reattach manifold, tighten bolts, reattach heat shields and re-connect the battery.
• Q:

  How to Service and Repair a Catalytic Converter for 3.9L/5.9L Engines on 2002 Dodge Dakota?

  A:

  The steps to follow in order to repair the catalytic converter in 3.9L/5.9L engine are to ensure the vehicle is raised, apply Mopar Rust Penetrant, and extract the required clamps and mounts. Check the damage, knock internally and reconnect the oxygen sensor. Install converter again, close connections up to 41 Nm, and look after leaks by rolling down the car.
• Q:

  How to Service and Repair an Exhaust Pipe Intermediate Pipe on 2002 Dodge Dakota?

  A:

  To repair the intermediate pipe, raise the vehicle and apply Mopar Rust Penetrant to the clamp nuts. Remove the nuts and possibly loosen other exhaust sections. Install the extension pipe, tighten clamps to 47 Nm, then lower the vehicle and check for leaks and alignment issues.