2002 Dodge Ram 2500 Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2002 Dodge Ram 2500

• Q:

  How to Know When to Replace a Clock Spring and What Are the Steps Involved on 2002 Dodge Ram 2500?

  A:

  Replace the Clock Spring if it is faulty or has been airbag deployed as it cannot be repaired. Turn off airbag system, remove driver airbag and disconnect wires if necessary. Use a puller to remove the steering wheel, and replace the Clock Spring; make sure components are properly centered and reinstalled.
• Q:

  How to Service an Air Bag Control Module on 2002 Dodge Ram 2500?

  A:

  To service the air bag Control Module, disconnect the battery negative cable and wait for two minutes. Do not strike the module and replace it if dropped. Remove the necessary component(s), disconnect the wire harness, and replace the ACM as a unit. Reinstall everything, including torque specifications, and perform a checkup test before reconnecting the battery.
• Q:

  How Does Airbag Deployment Affect Safety and Compliance on 2002 Dodge Ram 2500?

  A:

  Following deployment of the air bags, install new air bags, driver air bag cover of the trim, Clock spring and steering column assembly, which could be damaged. Before service, switch off the air bag system. Wear a protective equipment during cleanup, and dispose of air bags, and vacuum to clean up remnants of powder.