2003 Dodge Dakota Catalytic Converter, Muffler, Exhaust Pipe, Tail Pipe

Exhaust Pipe, Muffler, Tail Pipe Installation and Repair Tips for 2003 Dodge Dakota

• Q:

  How to Service or Replace a Muffler on 2003 Dodge Dakota?

  A:

  To remove or service muffler, hoist the vehicle then use Mopar Rust Penetrant on clamp nuts. Take out the muffler in the tailpipe and the extension pipe. Install the muffler again, moves the clamps and the nuts to a certain torque. Lastly, drop the vehicle and look at the exhaust leak and alignment.
• Q:

  How to Maintain and Fix the Tail Pipe on 3.9L/4.7L Engines on 2003 Dodge Dakota?

  A:

  For 3.9L/4.7L engines to repair the tailpipe, raise the vehicle and apply Mopar Rust Penetrant to the clamp nuts. Remove the exhaust clamp and remove the tailpipe. Reinstall by connecting the oxygen sensor, setting the tailpipe and tightening the clamp. Finally, look for leaks and contact problems.
• Q:

  How to Maintain and Fix the Exhaust Pipe for 3.9L and 5.9L Engines on 2003 Dodge Dakota?

  A:

  To fix exhaust pipe for 3.9L and 5.9L engine, raise car and spray bolts with Mopar Rust Penetrant. Disconnect the oxygen sensor and take off the exhaust pipe. Check and replace damaged parts. Reinstall the exhaust pipe, tighten all the connections and check for leaks after having lowered the vehicle.