2003 Dodge Neon Catalytic Converter, Exhaust Manifold, Exhaust Hanger, Exhaust Pipe

Catalytic Converter, Exhaust Manifold, Exhaust Pipe Installation and Repair Tips for 2003 Dodge Neon

• Q:

  How to Service and Repair an Exhaust Manifold on 2003 Dodge Neon?

  A:

  In order to fix the exhaust manifold, disconnect the battery, lift the vehicle, and take out the heat shield and support bracket. Disconnect the exhaust system, air hose and oxygen sensor and disconnect the manifold. Wipe down the areas, check on the damages and replace the manifold and components and tighten all the fasteners accordingly.
• Q:

  How to Service and Repair an Exhaust Pipe on 2003 Dodge Neon?

  A:

  To repair the exhaust system - intermediate pipe, lift the car and apply penetrating oil to the band clamp fastener. Take off the muffler, loosen the band clamp and take off the intermediate pipe. Clean up all parts, align components and tighten clamps to 47 Nm. Replace any worn clamps and hook up the ground strap.
• Q:

  How to Service a Catalytic Converter on 2003 Dodge Neon?

  A:

  To service the catalytic converter, cool the exhaust system and then remove the muffler and exhaust pipe. Disconnect the down stream oxygen sensor, remove the converter, and check for problems. Reinstall new flange gasket, tightening fasteners and reconnecting components, attention to alignment and do not over-tightening. Reinstall the oxygen sensor if removed.