2003 Dodge Ram 1500 Van Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2003 Dodge Ram 1500 Van

• Q:

  How to service the Air Bag Control Module in van conversions on 2003 Dodge Ram 1500 Van?

  A:

  In order to replace the air bag Control Module (ACM), loosen the battery negative cable and wait two minutes. Take off the ACM cover, loosen the wire harness and unscrew the ACM. Installation requires locating the ACM, fixing it, reconnecting the harness and enveloping it. Conduct a verification test and then reconnect a battery.
• Q:

  What are the essential steps to take after a vehicle collision involving an Airbag on 2003 Dodge Ram 1500 Van?

  A:

  When there is a collision, turn off the airbag system and then proceed to service the system. Unplug the battery, wait two minutes and change all restraints put on. Safety gear at the time of cleaning up because residues might cause irritation of skin and eyes. Dispose air bags and tensioners according to the rules, and vacuum inside.
• Q:

  What steps should be taken before beginning the Clock Spring replacement procedure on 2003 Dodge Ram 1500 Van?

  A:

  Prior to starting, make sure that the front wheels are straight and disengage the battery to turn off the restraint system. After removal of the driver air bag and steering wheel replace the faulty Clock Spring. Install the Clock Spring again, reconnect wiring and put the steering column and air bag back together.