2003 Dodge Ram 2500 Van Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2003 Dodge Ram 2500 Van

• Q:

  What steps should be taken before beginning the Clock Spring replacement procedure on 2003 Dodge Ram 2500 Van?

  A:

  Prior to starting, make sure that the front wheels are straight and disengage the battery to turn off the restraint system. After removal of the driver air bag and steering wheel replace the faulty Clock Spring. Install the Clock Spring again, reconnect wiring and put the steering column and air bag back together.
• Q:

  How to service the Air Bag Control Module in van conversions on 2003 Dodge Ram 2500 Van?

  A:

  In order to replace the air bag Control Module (ACM), loosen the battery negative cable and wait two minutes. Take off the ACM cover, loosen the wire harness and unscrew the ACM. Installation requires locating the ACM, fixing it, reconnecting the harness and enveloping it. Conduct a verification test and then reconnect a battery.
• Q:

  How can a faulty or damaged passenger Airbag be replaced on 2003 Dodge Ram 2500 Van?

  A:

  To replace a faulty passenger air bag, disconnect the battery, wait two minutes and remove the glove box. Unscrew the air bag, disconnect the pigtail wire and pry open the air bag door. Install the new air bag and attach the wire and roll the glove box back up again without reconnecting the battery until testing is complete.