2003 Dodge Sprinter 2500 Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2003 Dodge Sprinter 2500

• Q:

  How to Maintain a Clock Spring Assembly on 2003 Dodge Sprinter 2500?

  A:

  In order to service Clock Spring assembly, disconnect the battery, wait 2 minutes and make sure that the front wheels are straight. Disassemble the air bag in the driver, disconnect the pigtail connectors, and disassemble the steering wheel. Change or re-use the Clock Spring and make certain it is centred and replace components and reconnect wires.
• Q:

  What Precautions Should Be Taken Before Servicing the Air Bag Control Module on 2003 Dodge Sprinter 2500?

  A:

  When servicing components of airbag, disconnect the battery negative cable and have a wait of two minutes before continuing with the process. Carefully remove the airbag Control Module so that it is not dropped. After installation disconnecting the battery, reinstall it, fix all parts, and carry out a check-up test. It may require initializing in case of replacement.
• Q:

  What Steps Are Necessary for a Safe Return After Airbag Deployment on 2003 Dodge Sprinter 2500?

  A:

  After a supplemental restraint deployment, replace deployed components such as the driver air bag, Clock Spring and seat belt tensioners, which are not reusable. Inspect mounting surfaces for air bag Control Module. Wear safety gear when cleaning up and vacuuming up any residue as much as possible and properly dispose of damaged restraints.