2003 Dodge Sprinter 2500 Camshaft, Timing Chain, Timing Cover, Cam Gear

Camshaft, Timing Chain, Timing Cover Installation and Repair Tips for 2003 Dodge Sprinter 2500

• Q:

  How to Service and Repair a Timing Chain on 2003 Dodge Sprinter 2500?

  A:

  The timing chain can be repaired by disconnection of the battery, disconnecting the engine and cylinder head, as well as timing case cover. Eliminate parts such as tensioning rail and camshaft sprocket. Fit a new timing chain with special tools and make sure it is well aligned. Install all components again, reattach battery, look after leakages.
• Q:

  How to Remove and Install a Timing Cover on 2003 Dodge Sprinter 2500?

  A:

  To detach the timing chain cove, detach the battery and empty fluids and take off other engine parts. Check and remove gaskets when necessary. Install parts, use sealant and tighten bolts to tightness. Lastly, re-attach battery, turn on the engine and look at the warnings and leaks.
• Q:

  How to Remove and Install a Camshaft on 2003 Dodge Sprinter 2500?

  A:

  In order to remove camshaft, you need to disconnect the battery, remove engine cover and high-pressure lines. Turn the engine to TDC for cylinder #1 and lock the inlet camshaft and remove the timing chain tensioner. Carefully remove the camshaft and bearing caps then reinstall to proper alignment and torque specification. Lastly, reconnect the battery and test for leaks.