2004 Chrysler 300M Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2004 Chrysler 300M

• Q:

  How to Maintain a Clock Spring Assembly on 2004 Chrysler 300M?

  A:

  In order to service the Clock Spring Assembly, you will need to align the front wheels, lock the steering column and disconnect the negative battery cable. Remove the air bag, steering wheel and shrouds. Replace the clock spring, be sure to connect and torque correctly. Reinstall components and check the air bag system before re-connecting the battery.
• Q:

  How to Replace the Air Bag Control Module in a Six-Passenger on 2004 Chrysler 300M?

  A:

  In the case of six-passenger cars, the Occupant Restraint Controller (ORC) must be substituted by cutting off the negative battery connection, opening the glove box, and taking out the required parts. Unassemble the connector of the ORC, unscrew mountings and install the new ORC. Reconnect all components and do not reconnect the battery before testing airbag system.
• Q:

  How to Safely Arm and Disarm an Airbag System on 2004 Chrysler 300M?

  A:

  To put the airbag system on or off, begin by disconnecting the negative battery cable. Wait at least two minutes before waiting for the capacitor to discharge as this is the safest way to disable the airbag system. Skipping this step may lead to the accidental deployment and potential injury.