2004 Chrysler Sebring Door Hinge, Door Latch Assembly, Door Lock Actuator Motor, Exterior Door Handle

Door Hinge, Door Latch Assembly, Exterior Door Handle Installation and Repair Tips for 2004 Chrysler Sebring

• Q:

  How to Service and Repair a Front Door Hinge on 2004 Chrysler Sebring?

  A:

  To repair the hinge in the front door, support the door and mark hinge positions. Take bolts from hinge of door & A-pillar and take hinge out. Install a new hinge - with marks - and tighten bolts to 28 N.m. Reattach the door check strap and check door alignment.
• Q:

  How to Service and Repair a Front Door Latch Assembly on 2004 Chrysler Sebring?

  A:

  In order to fix the front door latch, the door trim and watershield must be removed and raise the glass. Detach the lock and latch rods, and put the latch back in, and the new one. Re-attach all parts, re-adjust the latch and check it is working then re-install the trim and water dam.
• Q:

  How to Maintain and Fix Exterior Door Handle on 2004 Chrysler Sebring?

  A:

  In order to fix the handle of the front door, take off the door trim panel and glass, and then separate the latch rod. Take out the handle by removing the securing nuts. Reinstall the handle, reconnect the latch rod and replace the trim panel. Finally, examine the operation of the handle and adjust the latch if necessary.