2004 Dodge Dakota Catalytic Converter, Exhaust Manifold, Exhaust Hanger, Exhaust Pipe

Catalytic Converter, Exhaust Manifold, Exhaust Pipe Installation and Repair Tips for 2004 Dodge Dakota

• Q:

  How to Service and Repair a Catalytic Converter on a 3.7L Engine on 2004 Dodge Dakota?

  A:

  To fix the catalytic converter on 3.7L engine, remove the vehicle and spray the bolts with Mopar Rust Penetrant. Remove needed clamps, rear engine mount and crossmember. Reinstall converter, it is necessary to ensure the correct alignment and torque. Finally, check for exhaust leaks and adjust the system accordingly.
• Q:

  How to Remove and Install an Exhaust Manifold on 2004 Dodge Dakota?

  A:

  In order to dismantle the right exhaust manifold, disconnection of the battery, raising the vehicle, and disconnection of the exhaust pipe. Take away the gasket, then the manifold and the heat shield. Installation: When reinstalling, use new studs where required, use sealer and tighten all components to required torque.
• Q:

  How to Maintain and Fix an Exhaust Pipe on a 3.7L Engine on 2004 Dodge Dakota?

  A:

  To fix an exhaust pipe for a 3.7L engine, lift the vehicle and spray Mopar Rust Penetrant on the bolts. Disconnect the oxygen sensor and remove the exhaust pipe then reattach with all nuts tightened to specification torque. Finally, look for leaks and make sure there is no contact with body panels.