2005 Dodge Dakota Camshaft, Timing Chain, Timing Cover, Cam Gear

Camshaft, Timing Chain, Timing Cover Installation and Repair Tips for 2005 Dodge Dakota

• Q:

  How to Perform a Timing Cover Service and Repair on 2005 Dodge Dakota?

  A:

  To service the timing cover, disconnect the battery, drain the cooling system, and remove the fan assembly and radiator fan. Remove hoses, the accessory drive belt tensioner, crankshaft damper, generator, and A/C compressor. Use Mopar(R) Grey Engine RTV sealant for the cover, then reinstall components and refill the cooling system.
• Q:

  How to Adjust Timing on a Single Camshaft on 2005 Dodge Dakota?

  A:

  To adjust a single camshaft's timing, stabilize the secondary chain drive, mark the chain position, and remove the camshaft drive gear. Re-index it until the V6 marks align. Remove excess oil from the retaining bolt, reinstall it, and tighten to 122 Nm. Verify alignment after two crankshaft revolutions and install cylinder head covers.
• Q:

  How to Maintain and Fix a Timing Chain on 2005 Dodge Dakota?

  A:

  To maintain the timing chain, one needs to remove the battery, empty the cooling system and take off required parts. Time the marks, discard sprockers and check wear. Install new components and make sure that they are of good alignment and lubricated. Install all bolts to required cope and ensure timings and reassemble the system, including filling the cooling system.