2005 Dodge Durango Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Air Bag Sensor, Airbag, Clock Spring Installation and Repair Tips for 2005 Dodge Durango

• Q:

  What Steps Should Be Taken After Airbag Deployment in a Collision on 2005 Dodge Durango?

  A:

  After a collision, vehicles with deployed air bags must replace the restraints, Clock Spring, and seat belt tensioners. Deployed side curtain air bags require replacement of the entire unit and surrounding trim. Inspect sunroof drain tubes and ensure proper mounting of sensors to prevent air bag issues. Other components should be inspected and replaced as needed.
• Q:

  How to Safely Service the Air Bag Control Module on 2005 Dodge Durango?

  A:

  To service the Air Bag Control Module, turn off the supplemental restraint system by removing the negative battery cable. Do not drop the ORC, it has a very important sensor for impact on it. Remove the ORC, install the new one, and check for proper connections before installing the center console back in and running a verification test.
• Q:

  How to Remove and Reinstall a Clock Spring Assembly on 2005 Dodge Durango?

  A:

  To remove the Clock Spring assembly you must make sure the front wheels are aligned straight, disconnect the battery and wait two minutes. Cut off the driver air bag, steering wheel, and shrouds. Disconnect wire harnesses and remove the Clock Spring. For installation, reverse the steps, making sure to align everything correctly and secure everything.
• Q:

  How to Service the Air Bag Sensor Located in the D-Pillar on 2005 Dodge Durango?

  A:

  To service the D-pillar impact sensor, disconnect the battery negative cable and wait for two minutes. Remove the quarter trim panel, unscrew the sensor and the harness. Install the new sensor making sure the engagement is correct and securing it. Reinstall the trim panel but do not reconnect the battery for now for testing.