2005 Dodge Neon Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2005 Dodge Neon

• Q:

  How to Safely Arm and Disarm an Airbag System on 2005 Dodge Neon?

  A:

  To put the airbag system on or off, begin by disconnecting the negative battery cable. Wait at least two minutes before waiting for the capacitor to discharge as this is the safest way to disable the airbag system. Skipping this step may lead to the accidental deployment and potential injury.
• Q:

  How to Maintain a Clock Spring Assembly on 2005 Dodge Neon?

  A:

  To service the Clock Spring Assembly, you must have the front wheels straight and disconnect the battery. Remove the steering wheel and the shrouds to get inside the clock spring. Take off the multi-function switch and disconnect the 7-way connector. Follow specific steps for removal and installation will make sure proper wiring and torque specifications.
• Q:

  How to Safely Service the Air Bag Control Module on 2005 Dodge Neon?

  A:

  To service the air bag Control Module, disconnect the battery negative cable and wait two minutes. Remove the center console and the module, then reconnect the ACM ensuring all tabs are engaged. Position the ACM correctly, tighten the nuts, and reinstall the console. Do not reconnect the battery until the system is tested.