2005 Dodge Ram 2500 Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2005 Dodge Ram 2500

• Q:

  What Steps Should Be Taken After Airbag Deployment in a Collision on 2005 Dodge Ram 2500?

  A:

  Following a crash, the deployed restraints should be replaced by vehicles. In the event of the deployment of the driver air bag, change Clock Spring, in the event of the passenger air bag, change the door. Seat belt tensioners and side curtain air bags have to be changed as well. Check every part of the equipment after deployment.
• Q:

  How to Service an Air Bag Control Module on 2005 Dodge Ram 2500?

  A:

  To service the air bag Control Module, remove the battery negative cable and wait two minutes. Remove the components needed for access, disconnect the wire harness connectors and remove the module. Reinstall new module making sure alignment is good and reconnect harness. Do not reconnect the battery until tests for verification are finished.
• Q:

  How to Service and Repair a Clock Spring Assembly on 2005 Dodge Ram 2500?

  A:

  In order to fix the Clock Spring Assembly, the steering wheel should be in line, remove the battery and wait a period of two minutes. Take out the shrouds, steering wheel and airbag. Install or fasten the Clock Spring with it in the middle. Put together parts, reattach airbag, and battery cable.