2006 Dodge Dakota Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Sensor, Airbag, Clock Spring Installation and Repair Tips for 2006 Dodge Dakota

• Q:

  How to Maintain and Fix a Clock Spring Assembly on 2006 Dodge Dakota?

  A:

  To fix the Clock Spring assembly, shut off the supplemental restraint system and wait two minutes. Remove the driver airbag, steering wheel and shrouds. Uninstall Clock Spring and then install new or used Clock Spring. Put the shrouds, steering wheel, and reconnect the battery back together.
• Q:

  How to Safely Service an Air Bag Sensor on 2006 Dodge Dakota?

  A:

  To service the front impact sensor, install the battery negative cable and disconnect it then wait two minutes to disable the supplemental restraint system. Take out the sensor, fit in the new sensor, re-fit the harness and screw it in place. The battery should not be reconnected until the verification test is done.
• Q:

  How to Maintain Your Driver's Airbag on 2006 Dodge Dakota?

  A:

  To service the driver air bag, remove the battery, wait two minutes, remove the air bag from the steering wheel. Remove connectors carefully and remove housing. For assembly, put the cushion and trim cover in place, run wires and secure connections. Make sure of correct orientation before reinstalling the air bag.