2006 Dodge Dakota Camshaft, Timing Chain, Timing Cover, Cam Gear

Camshaft, Timing Chain, Timing Cover Installation and Repair Tips for 2006 Dodge Dakota

• Q:

  How to Remove the Right Camshaft on 2006 Dodge Dakota?

  A:

  In order to access right camshaft, the timing chain must be unattached without turning the camshafts or the crankshaft. Prevent overextensioning of the tensioners with tool 8379. Connect the chain of mark timing, take out the camshaft position sensor and loosely screw the bearing cap bolts. Install new camshaft taking care to align and torque requirements. Install the sensor and cover again.
• Q:

  How to Assess Timing Chain Wear on 2006 Dodge Dakota?

  A:

  To measure timing chain wear, remove the timing chain cover and rotate the engine clockwise until maximum tensioner extension. Measure the distance between the secondary timing chain tensioner housing and the piston ledge, it should be less than 15 mm (0.5906 inches). If broken over, replace the chains.
• Q:

  How to service a timing cover on 2006 Dodge Dakota?

  A:

  To service the timing cover, disconnect the battery, drain the cooling system, and remove the fan assembly and radiator fan. Remove hoses, the accessory drive belt tensioner, crankshaft damper, generator, and A/C compressor. Use Mopar Grey Engine RTV sealant for installation, then reassemble and refill the cooling system.