2006 Dodge Durango Camshaft, Timing Chain, Timing Cover, Cam Gear

Camshaft, Timing Chain, Timing Cover Installation and Repair Tips for 2006 Dodge Durango

• Q:

  How to Properly Service a Camshaft on 2006 Dodge Durango?

  A:

  The procedure to service the right camshaft is as follows; remove the cylinder head cover and position the engine to TDC engine number 1. Label timing chain, loosen sprocket bolt and attach tensioners. Take out the camshaft position sensor then the camshaft and bearing caps. Apply lubricate and re-fit in order of tightening bolts. Lastly, spin and tighten the sprocket.
• Q:

  How to Assess Timing Chain Wear on 2006 Dodge Durango?

  A:

  To measure timing chain wear, take the timing chain cover off and turn the engine clockwise until maximum timing chain tensioner piston extension. Measure the distance between the secondary timing chain tensioner housing and the piston step ledge; should be less than 15 mm (0.5906 inches) If exceeded, replace the chains.
• Q:

  How to Service the Timing Cover and Chain on 2006 Dodge Durango?

  A:

  To service the timing chain, disconnect the battery, drain the cooling system and remove the fan assembly and radiator fan. Detach hoses, accessory drive belt tensioner, crankshaft damper, generator, and A/C compressor. There is a Mopar Grey engine RTV sealant for the timing cover, so reinstall parts and fill the cooling system.