2006 Dodge Magnum Wiper Motor, Windshield Wiper, Windshield Washer Fluid Reservoir, Wiper Arm

Windshield Washer Fluid Reservoir, Wiper Arm, Wiper Motor Installation and Repair Tips for 2006 Dodge Magnum

• Q:

  How to Maintain a Windshield Washer Fluid Reservoir on 2006 Dodge Magnum?

  A:

  To access the windshield washer reservoir, disconnect the battery negative cable, remove the front fascia and disconnect the electrical harness. Drain the fluid, remove the reservoir and reinstall it with mounting fasteners torqued to 7 N.m. Reconnect everything and fill the reservoir then reinstall the front fascia.
• Q:

  How to Service and Repair a Rear Wiper Motor on 2006 Dodge Magnum?

  A:

  To service the rear wiper motor, disconnect the battery negative cable, remove the wiper arm and liftgate trim and remove mounting fasteners. Inspect and replace the motor shaft seal (wiper) if necessary. Reinstall the motor, trim and wiper arm, then reinstate the battery cable.
• Q:

  How to Maintain the Front Wiper Arm on 2006 Dodge Magnum?

  A:

  To maintain the front wiper arm, loosen nut caps 3 and retaining nuts 4. Work through puller to remove wiper arm 7, then remove wiper arms 1 and 2. To install, nut 4 and secure wiper arms 1, and screwing to 18 N.m, replace nut caps 3.