2006 Dodge Sprinter 2500 Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2006 Dodge Sprinter 2500

• Q:

  How to Maintain a Clock Spring Assembly on 2006 Dodge Sprinter 2500?

  A:

  To service the Clock Spring assembly, turn off the supplemental restraint assembly by disconnecting the battery negative cable. Remove the driver air bag, steering wheel and Clock Spring. For the installation, make sure you pre-center the Clock Spring, fix it and ensure that you reconnect all the components correctly.
• Q:

  How to Service an Air Bag Control Module on 2006 Dodge Sprinter 2500?

  A:

  To service the Air Bag Control Module, disconnect the battery Negative cable and wait for 2 minutes. Access the ACM by removing the seat riser cover and seat riser bracket. Disconnect the ACM, reinstall it in the appropriate alignment and tighten screws. Lastly, carry out a verification test if the ACM is replaced.
• Q:

  What Steps Should Be Taken After an Airbag Deployment on 2006 Dodge Sprinter 2500?

  A:

  When a supplemental restraint has been deployed, change deployed restraints prior to resuming vehicle use. Check and repair air bag parts and fittings. Use protective clothing when cleaning, vacuuming the rooms and outlets. Get rid of your worn out restraints correctly, according to the regulations and vacuum again to get out any excess powder.