2006 Jeep Grand Cherokee Wiper Motor, Windshield Wiper, Windshield Washer Fluid Reservoir, Wiper Arm

Windshield Washer Fluid Reservoir, Wiper Arm, Wiper Motor Installation and Repair Tips for 2006 Jeep Grand Cherokee

• Q: How to Remove and Install Wiper Arms on the Front and Rear on 2006 Jeep Grand Cherokee?

  A: To remove the front wiper arm, lift it to release the spring tension and then take off the nut cap and remove the securing nut. Make sure that the wiper motor is in the park position before installing it. For rear wiper take off cap, nut and arm in the same way (alignment and fix).
• Q: How to Maintain a Wiper Motor on 2006 Jeep Grand Cherokee?

  A: Disconnection of the battery, removal of the wiper arm, and bezel and trim panel are necessary to service the wiper motor. Disassemble the wire harness, loosen the screws on the motor and take off the motor. To install, follow the steps in reverse making sure to use correct torque on the nut and screws and attach the battery back.
• Q: How to Maintain the Windshield Washer Fluid Reservoir on 2006 Jeep Grand Cherokee?

  A: In order to service the windshield washer reservoir, disconnect the negative battery cable, turn the steering wheel to the left and remove the reservoir cap. Take out the splash shield, disconnect and hose and connectors, unscrew the reservoir. Before replacing the battery, re-install the reservoir, re-connect hoses and refuel it.