2007 Chrysler PT Cruiser Catalytic Converter, Muffler, Exhaust Pipe, Tail Pipe

Catalytic Converter, Exhaust Pipe, Muffler Installation and Repair Tips for 2007 Chrysler PT Cruiser

• Q:

  How to Install a Catalytic Converter on a Turbocharger on 2007 Chrysler PT Cruiser?

  A:

  In order to install the catalytic converter, one should first lay the gasket on the turbocharger after which the pre-catalytic converter should be placed over it. Install bracket and bolts without tightening, and then use hand tightening of the clamp. Seat the correct position, tighten the clamp bolt and lastly, attach the oxygen sensor.
• Q:

  How to Maintain and Fix an Exhaust Pipe on 2007 Chrysler PT Cruiser?

  A:

  To repair the exhaust pipe, make sure the system is cool. Raise the vehicle and apply penetrating oil to the band clamp and avoid petroleum based lubricants. Remove the muffler, loosen the clamp and remove the intermediate pipe. Clean all parts and replace worn parts with original equipment or equivalent parts.
• Q:

  How to Properly Service a Muffler on 2007 Chrysler PT Cruiser?

  A:

  When servicing muffler, make sure that the exhaust system is cool. Lift the vehicle, rub penetrating oil on the band clamp and petroleum lubricants should be avoided. Unscrew the ground strap, unscrew the clamp and unscrew the muffler. Wash all components and change the old components with the original or similar components.